Something to get your panties in a bunch

[Rinku-Bitch]

I have no springs....

Like, none....

So no I don't

But I have lots of plans for real suspension, and going lower in the future, and maybe getting
some camber/toe adjusters too

[FunfGang]

Roughly negative 7 degrees in the rear, I would like less but my wheels wouldn't fit....

-7? You have the weld in camber and toe adjusters?

[Rinku-Bitch]

Roughly negative 7 degrees in the rear, I would like less but my wheels wouldn't fit....

[FLAWLESS]

car is coming together very nicely meaty tires and camber looks so aggressive, how much camber are u running in the rear?

[Rinku-Bitch]

Thanks you guys ^^

Also picked this up yesterday
[IMG][/IMG]


And my buddy gave me his spare battery
[IMG][/IMG]


So now I just need to plug in/wire everything up and it will turn over which will be cool,
also I don't remember where any of the engine harness plugs go, please help

If you have detailed pics or a video or even a diagram of installing an M10 wiring harness,
PLEASE share it!


Thanks again, 'till next time

-Link

[Stievenbol]

Wouw u really have so much work to do
wish u great amounts of courage

[milano_red]

It's amazing what a set of wheels can do for a car! Lookin damn good man!

[Rinku-Bitch]

Hey guys, so I found some 85 M10 parts somewhere... But first.

wow kool
[IMG][/IMG]


Wonder what this could be?
[IMG][/IMG]


Oh it's a wiring harness
[IMG][/IMG]


I thought this picture looked cool
[IMG][/IMG]


Picked up a couple doo-dads, and a thingameter
[IMG][/IMG]


Put a piece of metal in my dash
[IMG][/IMG]


Then put some doo-dads INSIDE the metal, cray
[IMG][/IMG]


It's kinda exciting ok
[IMG][/IMG]


Also I have made exactly 0.07% progress on plugging my wiring harness in, I forgot where
everything goes except the injector plugs, picking up an ECU tomorrow, and then more stuff next paycheck and yeah... Stuff...

Thanks for being here for me or whatever.

-Link

[Rinku-Bitch]

Thanks a lot, the M10 is waiting on wiring and ECU, and I have to get a fuel cell and run lines for it, and thats pretty much it, I just can't find 84 M10 parts anywhere

[CeliBra]

Holy balls, loving this. Read the whole thread. What's the status of the engine ATM?

[Rinku-Bitch]

Thanks guys, those stickers on my window is actually only half of it, it's ClutchLords but a few characters got ripped off, and my girlfriend got them for me aha

[dirtmcgirt]

damn dude, cars looking fresh, whered you cop those katakana stickers? so sick. sucbbed fo shore mane

[Staggered]

I like what I see here.

Keep going.

[Rinku-Bitch]

Look at me, I are kool guy.


Full droop
[IMG][/IMG]


Picked up some 205-50-R16 with decent tread for a couple bucks
[IMG][/IMG]


It is wheel
[IMG][/IMG]


About a half inch of wheel gap, turns out I didn't roll the fender nearly enough
[IMG][/IMG]


So much that when I jacked it back up the tire was stuck in the fender, like hard, took an hour to get out
[IMG][/IMG]


That's better
[IMG][/IMG]


Also got the front on, also had to roll the shit out of the fender, paint chips errywhere
[IMG][/IMG]


[IMG][/IMG]


I like it
[IMG][/IMG]


That's the end of my update, go like my page or kill yoseff

https://www.facebook.com/CltchLrdsDrpPnties?ref=hl

- Link

[Rinku-Bitch]

Maan, I have a really dope update for your guys, with pictures of my new fitment... But I'm sooo tired, so I'm gonna bump this and make you wait until tonight. K bye