Tweet
oh gawd... we got ourselves a 'Teaser'...
love to see some progess mate!
love to see some progess mate!
-
Lucas
Former daily: 2002 CLK 500 AMG - (sold) . . . . . . . . .
Project: 1986 W124 260E rebuild - (3.0 swap) . . . . . . . . . Follow me on IG : @loekaazDaily: 2004 Pontiac GTO. . . . . . . . . Daily Econobox: 2009 Mini Clubman CooperOriginally posted by LCG -
This build is awesome. I like the direction this is goingComment
-
nah not at all. the garage was dark and thats all the light i could get to show the color.Originally posted by loekaaz View PostIf you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
-
just read through the entire thread. car is coming along great, looking forward to finished product. keep it up man!
Comment
-
Thanks dude. Ok so finally got my intake finished with the fuel rail mounted so i can get all the fueling lines buttoned up. Didn't go with the flimsy style legs that comes on the stock rail. This is mounted solid.
If you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
-
Last few electrical bits I needed have shown up. Shouldn't be long now for a start up attempt.
If you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
-
Here's my concoction for the upper radiator hose. I just made a billet flange and ran a super tight 90 to avoid cutting into the rear suspension brace. I need to cut this down and clean it up once the lower hose is fitted as its kinda ugly haha
Here's the tstat setup. Need to add a bracket as well as a bung for coolant to the head and ecu temp sensor bung.
If you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
-
lookin good man, great progress!
Instagram: @half_lung
Comment
-
Hoping for nice weather this wknd to paint bumper,wing and deck lid.
If you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
-
This is amazing, good sir. I cannot wait to hear it most of all. We used have a race car with a VR6 and they sound absolutely wonderful. Please post videos of this when it's done!Comment
-
looking good.
you should fill in the bumperettes while the bumper cover is still unpainted.Comment
-
Im thinking about it. Otherwise i might cut a piece of carbon sheet and make kind of a euro plate background.Originally posted by white out View PostIf you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
-
I need to get a hold of a 90 degree elbow and hope i can trim it back enough to clear this. Much closer than i thought it was going to be.
If you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
-
what about a notch in that rail?Comment
-
Yeah if i need to i will but its all textured and id **** to have to cut and grind on it now. Im going to trim this one down first as it is pretty long. It just might be enough
If you're ordering custom adapters, call 775.530.2483 to make sure you are getting exactly what you want. Thanks
follow on IG: eurotrashapparelComment
Comment