If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Just testing out a camera position on the car, cam external, mic internal. Also an example of how bad my tyres hit my rear (and sometimes front) arches. Nasty. Canon…
Getting my N1 fitted tomorrow, a quick check of the hubs too. Where I had to replace the bolt through one of the camber arms, I think that the difference in bolt size is causing play in the camber, therefore my passenger side wheel is moving a bit. It's not a bit deal, but I need all my wheels balanced too as anything over 65 on the speedo means wheel wobble. The brakes are warped I think too, as under heavy braking the steering wheel shudders quite a bit.
Also, the toe-in on the rear wheels is appalling, the camber I will even out tomorrow as well as the toe. May as well while it's up on the ramps!
Took my barrels to the polishers yesterday, going to be about two weeks before I get them back. Now the PITA job of stripping the old ones of paint. So much on them, the laquer is redonk thick too.
Got some photos with my friend Stu yesterday, here's them.
i like the oem lights, but do you like the ctr lights? glad this doesnt have a ctr wing on it like every other ek hatch.... less sticker would really clean this thing up!
Comment