Radical.
Announcement
Collapse
No announcement yet.
the sorta flush nissan missile truck.....PICTURE WHORE WARNING
Collapse
X
-
Originally posted by pejsa View Postjust went threw it i had no idea you had the hurricanes on your truck. i love the new look dude!!!!
need MOAR LOW in the rear and get those fenders a little more flared and you'll be a straight gangster =]
Thanks man, I've had the wheels for about 6months before I recently put them on. And yes more low in the rear is happening soon, hopefully before a show the 22nd of this month.My Static Hardbody minitruck thread:http://www.stanceworks.com/forums/sh...ad.php?t=24537
Comment
-
so finally!!! today was the day i got to really tear into the truck, keep in mind at the begin inning of the day this was a complete truck and this was all accomplished in about 7 hours.
so i commenced in tearing down the interior, and removing all the KA wiring (notice the new bars for the cage)
and the KA I ripped out of it that only have 7000 miles on a rebuild lol
what my truck looks like
and i got the s13 engine crossmember mocked in place (just tacked, will be fully installed tomorrow)
oh and some of the parts from the d21 will live on in this, my newest addition to the family
slowly but surely this thing will get completedLast edited by pejsa; 01-31-2012, 11:32 PM.
Comment
-
Awesome! So jealous of this and the new Datsun.
E30 V8 Build thread
Go here be happy!
Instagram: stuartrussell
Store: alwaysindividual.bigcartel.com
Comment
-
thanks guys, and yes this truck is in east county, and yes I'm the one who slammed kevins e30.
ok so this is how i decided to mount the s13 clip
i made a set of frame spacers out of 2x4 120 wall and trimmed, bent, and mocked them up heres what they look like
the reason i had to do this is because the s13 clip's mounting holes are a lot wider apart than the stock d21 frame rails. comparison photos
heres the spacers mocked up
had to drill holes through them to mount the crossmember, here it is bolted up... keep in mind the spacers will be fully welded to the frame... i just don't have good pics of it yet.
BTW the s13 steering column bolted right in to the stock mounting behind the dash and lined up perfect with the rack and pinion, ill have pics of that later onLast edited by pejsa; 01-31-2012, 11:32 PM.
Comment
-
ok so heres how the spacers look welded to the frame
still gonna gusset it more to the frame, the fish plates are 1/4"
some full shots with the rack and column in
how the column fits through the fire wall
and check it out! it bolts/ fits in the stock location, and positioning feels right on the money
thats gonna be it for a little while, i need to start building the motor, and bolt a trans up to it before i start cutting the fire wall and making the new trans x-memberLast edited by pejsa; 01-31-2012, 11:32 PM.
Comment
Comment