Just a Truck.

[DonkeyPunch]

Looks good. Be careful with the switchspeed controller, the USB ends tend to fall out very easy. I've replaced two on my wife's audi so far :/

[tohoopty]

you are going to **** the exhaust once the bed is on.

[way2fastx3]

AWWW shix, What rear shocks are you using. i might order some if they're short enough

They are actually the stock shocks haha.

Looks good. Be careful with the switchspeed controller, the USB ends tend to fall out very easy. I've replaced two on my wife's audi so far :/

Thanks for the heads up. I'll have to keep an eye on it.

[way2fastx3]

Huston we have lift off....

[244Brick]

Yaaaaaaaaaaaaaaaas

[Belvader]

its so perfect

[way2fastx3]

Finally starting to work on the bed to "TEMPORARY" get it so the truck is drivable and legal for H2Oi.

Over the winter i am going to build the bed up to my standards and make it show worthy.

I cut the big ol' hole out of it for the notch, and then cleaned up all the rust and holes in the bottom and cleaned it up with some underside paint. I still need to touch up the actually truck colors paint under it from all the years of road tear and rock chips.



Went with a flat black based paint under it.


I redid the inside of the bed with the Rhino Liner i had left from when i did it a few years back. It's not perfect but it looks alot better now with no scratches and junk with rust starting inside.



This is basically the idea i am going for the bed over the winter. I few different things from this but you get the idea. It's going to be alot of work but i think i have enough resources and friends with the right tool/machines that can help me create my design.

[archie.]

this thing has come such a long way. Love it.

[SnugglebearFoN]

Thats the bed of my buddy chads hardbody, thr bed on my yota is done similar, except I have a door in the center. Which I think he has now on his, but I think raised bed floor is the best way to go, keep everything hidden. I dont like atttacting that much attention, but at shows when you want to show everything just have the door open.

[way2fastx3]

Truck is 100% and back together just in time for H2Oi.

Here is a shot of the finished product (For Now) at the YUP!!! 2014 Catalina Wine Dragger.
Ended up placing 2nd in the S-10 class.



If i get time before H2O, i will personally take a few good pictures of everything all done.

[Earl]

How did you only place second? You have done an excellent job. Well done to you=)

[Suburuuh]

Sweet and congratz!

[Randomofodication]

The work on this thing is coming out absolutely beautiful man, keep up the great work

[Belvader]

Its awesome man, cant wait to see rolling shots of it at h2o rolling down the strip

[BloodyBlazer]

Damn cole...your build is incredible man!.wish it was that easy to bag a blazer on the back half hahah