Just a Truck.

[way2fastx3]

Unfortunately Ms. Mother Nature decided to ran on my parade today. I got alot of stuff done this weekend and probably wont get to pick back up on it for a few weeks due to my work schedule and traveling. Might take it to a meet this week and i'll post up pictures if theirs any.


Cut and Gut 01 by Cole Lenhart, on Flickr

[CrackerTeg]

Mother Nature is a filthy whore.

I probably missed it but you plan on notching the rear?

[way2fastx3]

Mother Nature is a filthy whore.

I probably missed it but you plan on notching the rear?

Ya to a certain point. I'm going to build a custom 4-link setup in the rear.

[CrackerTeg]

Nice.

[way2fastx3]

Well i got the truck somewhat together enough to take it out to a local meet.


Meet 01 by Cole Lenhart, on Flickr

Meet 02 by Cole Lenhart, on Flickr

[Nick475]

You ever take that thing sliding around? Would look sweet without the bed

[way2fastx3]

You ever take that thing sliding around? Would look sweet without the bed

I have before a few times during certain weather conditions. I mean at this point i don't care if anything happens to it if i try anything since i'm building the frame from scratch anyway with a tube chassis.

[way2fastx3]

Got my tank delivered finally! Big puzzle piece to the build.


Tank 01 by Cole Lenhart, on Flickr

[Belvader]

please I beg of you drop this mother fucker already! everytime I come to your thread its just a tease, showing us pics of air tanks and such

[CraigSnedeker]

please I beg of you drop this mother fucker already! everytime I come to your thread its just a tease, showing us pics of air tanks and such

I second that notion haha

[way2fastx3]

please I beg of you drop this mother fucker already! everytime I come to your thread its just a tease, showing us pics of air tanks and such

I second that notion haha

Patience my friends... Perfection cannot be created over night. If you want to be messed with ill throw up a picture of the new wheels on the truck with the lip's sticking out about 2 inch's past the fenders

[Belvader]

If you want to be messed with ill throw up a picture of the new wheels on the truck with the lip's sticking out about 2 inch's past the fenders

[way2fastx3]

Alright people who don't care.... change of plans! The current status of the 73'' Nova Build Project has officially taken my garage spot. So now i can't build my back-half for the bag setup i wanted to do. I "REFUSE" to take it to somebody to do the work or have my truck sit in somebody else's shop to work on it so...... the bag build is on HOLD until we finish the Nova.

Good things is, i have 100% of the part's to bag the truck now so it's only a matter of time.

So to make a long story short, i am going to keep the truck static 100% UNTIL i can get my garage back. Since i will be attending H2O again this year i wanna make sure the truck is lower than what it is now to get rid of that nasty wheel gap i have.

I got all these goodies in this week. Be prepared!


Part's 01 by Cole Lenhart, on Flickr

While waiting for all my part's i took apart the front end to tuck some wires that i had hanging, replaced some dry rotted hoses and a bunch of other odd's n ends iv'e been holding off to do before heading down for H2O weekend.


Re-build 01 by Cole Lenhart, on Flickr

Shaved off all of the nasty rust on the front clip and re-painted it.


Re-Build 02 by Cole Lenhart, on Flickr

Re-Build 03 by Cole Lenhart, on Flickr

[way2fastx3]

Got "MOST" of my part's on the trucks.

We are at new heights now ladies and gentlemen AND got a little bit of face surgery....


Re-Lowered 06 by Cole Lenhart, on Flickr

Re-Lowered 07 by Cole Lenhart, on Flickr

Re-Lowered 02 by Cole Lenhart, on Flickr

DON'T MINE THE TINTED CORNER LIGHT'S! I have stock orange ones that i'm waiting for in the mail.


Re-Lowered 04 by Cole Lenhart, on Flickr


Like i said, i still have more part's to install. I have the things needed to get rid of the rake in the rear by dropping it 2'' inches in the rear.


Re-Lowered 05 by Cole Lenhart, on Flickr

[LOCALTHIRTEEN]

Got "MOST" of my part's on the trucks.

We are at new heights now ladies and gentlemen AND got a little bit of face surgery....


Re-Lowered 06 by Cole Lenhart, on Flickr

Re-Lowered 07 by Cole Lenhart, on Flickr

Re-Lowered 02 by Cole Lenhart, on Flickr

DON'T MINE THE TINTED CORNER LIGHT'S! I have stock orange ones that i'm waiting for in the mail.


Re-Lowered 04 by Cole Lenhart, on Flickr


Like i said, i still have more part's to install. I have the things needed to get rid of the rake in the rear by dropping it 2'' inches in the rear.


Re-Lowered 05 by Cole Lenhart, on Flickr

I actually like the tinted cornering lights. Makes the front end look really smooth and clean. That drop looks good. Is that from just the new arms?