Just a Truck.

[way2fastx3]

Nice1!

Because I want my safety to stay as it is, otherwise such a steering wheel with my initials would look so good too though!

The understandable. I didn't want to have this steering wheel setup until my truck wasn't my daily driver anymore. I have seat/harnesses that will be going into the truck over the winter as well so safety will be touched in all 4 corners. of the truck.

those goodies are nice! now install them! lol just playin

I KNOW MAN! Soon as i get my hub adapter in the mail this week.

Love this bad boy, so dope

Thanks for the positive feedback! Stay tuned for more dope stuff over the winter.

As some of you may know, i did a PhotoShoot a few years back on an air strip for a local car enthusiast company that was trying to get there name out over the web. I'm always trying to help promote small town companies like that because anything helps especially in the world we live in today.

Now @StanceCoalition has grown a huge amount and will continue to grow with the number of great photographers that are keeping the company moving and also the merchandise that is being created for the company.

Iv'e grown with the photographers over the past few years and they wanted to shoot my truck again now, that its in a completely different state. Here is one picture for now BUT many more to come. There may or may not be awesome sauce drag pictures...

StanceCoalition Shoot 01 by Cole Lenhart, on Flickr

If you get a chance head over to http://stancecoalition.com/ and check them out. Also head over to there FaceBook Page https://www.facebook.com/stancecoalition and give them a "LIKE" for more awesome stuff!

[TWM Performance]

Love this bad boy, so dope

[SD202]

those goodies are nice! now install them! lol just playin

[Suburuuh]

Nice1!

Because I want my safety to stay as it is, otherwise such a steering wheel with my initials would look so good too though!

[way2fastx3]

Obviously i have been busy with other parts of the truck over the past year BUT i finally got around to ordering the parts to get the steering wheel put into the truck.

As usual always paying attention to the details that most people don't notice/care for.

- Grip Royal Wheel W/ Chrome Center and Truck Paint Code Matched.
- NRG v2.8 GunMetal/Neochrome Quick Release
- Burned Titanium Bolts
- Aluminum Horn Bubble Run
- Crest Horn Button
- Bubble Shift Knob

Grip Royal 04 by Cole Lenhart, on Flickr

Grip Royal 02 by Cole Lenhart, on Flickr

Grip Royal 03 by Cole Lenhart, on Flickr

Grip Royal 01 by Cole Lenhart, on Flickr

Bubbles by Cole Lenhart, on Flickr

Looking to install in a few days hopefully!

[mikey G]

Looking solid man. Truck looks brand new...

[way2fastx3]

I might just bust out the money for the arms next week then. You got them with your own ball joints in mind?

It's comes with Ball Joints actually. Don't even have to worry about it. You get all the hardware you need as well EXCEPT the CA Nut/Bolts.

[erichhart]

I might just bust out the money for the arms next week then. You got them with your own ball joints in mind?

[way2fastx3]

Very good job on this man=) How do you like the ride bagged versus static?

I would say at times its better than static and other times static is better. I know Bags VS Static opinions on a car and truck are so different just cause of the weight difference.

From a slow drive from 0-35 the ride does its job and tackles every bump in the road and can be bouncy BUT from 35+ its a smooth ride. Its like riding on a cloud to be honest haha.

Looks like the MMW arms helped so much with the Caster issues when dropped. How are you liking the ride though. Are you running the relocated shocks up front yet? If so, hows the rubbing on turns?

Yes, the MMW Arms are 100% worth the money. They correct the caster issue and are also some of the best built control arms i have seen for the trucks. Like i said before the ride is great when you are actually driving.

I'm running 1991 Nissan D1 (AKA Hardbody) shocks. I'm acually going to be getting rid of them and im reaching out to someone who builds shocks and they are going to build special shocks for the front and rear with adjustment in them for a better ride.

I don't rub at all just cause i'm running the stock 15x7 wheels and also 1 1/2 adapters. If i wasn't running the adapters i would rub 100%.

[erichhart]

Looks like the MMW arms helped so much with the Caster issues when dropped. How are you liking the ride though. Are you running the relocated shocks up front yet? If so, hows the rubbing on turns?

[CraigSnedeker]

Nice

[Earl]

Very good job on this man=) How do you like the ride bagged versus static?

[way2fastx3]

Alright no more junk cell phone pictures...

Went out for a solid 50+ mile cruise yesterday to enjoy the truck and relax and decided to bring the camera along for a few good pictures.

[244Brick]

That came out like crap!














































































LMBO jk! I love it bro! can't wait to see the wheels on it!

[way2fastx3]

Thanks for all the awesome feedback guys.

I managed to make it down to H2Oi with no issues and no tickets at all! Here are a few cell phone picture's from the weekend that i have taken or someone else has.











My MiniTruck meet i hosted. Got shut down at the first location but managed to whip up another place quick.



The Struggle.


Hopefully over the next few weeks i'll find a few pictures of the truck over social media.