I.
Announcement
Collapse
No announcement yet.
Slammed on BBS
Collapse
X
-
RMs!!! <3<3<3
I love wide RMs!
Can't wait to see how this will look with the wheels on.
'87 Porsche 944 S | Ex-E36 Touring (2009 - 2016) | Daily: '02 Chrysler Sebring
www.bastienbochmann.de | Tief & Breit
Comment
-
So I test fitted 195/55R15's up front and out back on the 9's. Decided to go with a 205/50 out back and 195/50 up front. Back is coming down about a half inch ( was almost sitting on the tire with the 195 on the 9 ) and the front is coming down a good inch to two inches.
Going to do work and get another set of struts welded up and in the car asap.
Comment
-
Originally posted by DaRedRocket View PostOh yay! A good flare on those rear fenders will help you too...
Currently talking over a 2.7 stroker motor/paint engine/paint car idea with my buddy.
Comment
-
Originally posted by Dutchy View PostThe fronts are as rolled as flat as anything. The rears will likely require some cut-off wheel action and some welding.
Currently talking over a 2.7 stroker motor/paint engine/paint car idea with my buddy.
With 205's out back, lawlz.
I've got a turbo that would put an M20 above any 2.7 strokerEatin' Babies
Comment
-
Tires are coming in tomrrow morning, mounting them tomorrow after work.
Also started on modfying another set of struts, just need to weld on a new seat for the coilover sleeve.
I rolled the fenders front and back. Also pulled the front fender liners.
Now just need a stiffer spring for the rear and it should be good to go.
Comment
Comment