Slammed on BBS

[M.Burroughs]

I.

[SeanDub]

I!

[schroedin]

I.

[frink84]

I!!!!!!

[Dr.AK]

RMs!!! <3<3<3
I love wide RMs!

Can't wait to see how this will look with the wheels on.

[Dutchy]

So I test fitted 195/55R15's up front and out back on the 9's. Decided to go with a 205/50 out back and 195/50 up front. Back is coming down about a half inch ( was almost sitting on the tire with the 195 on the 9 ) and the front is coming down a good inch to two inches.

Going to do work and get another set of struts welded up and in the car asap.

[driggers.a]

Oh yay! A good flare on those rear fenders will help you too...

[Dutchy]

Oh yay! A good flare on those rear fenders will help you too...

The fronts are as rolled as flat as anything. The rears will likely require some cut-off wheel action and some welding.

Currently talking over a 2.7 stroker motor/paint engine/paint car idea with my buddy.

[driggers.a]

The fronts are as rolled as flat as anything. The rears will likely require some cut-off wheel action and some welding.

Currently talking over a 2.7 stroker motor/paint engine/paint car idea with my buddy.

With 205's out back, lawlz.

I've got a turbo that would put an M20 above any 2.7 stroker

[Dutchy]

I don't do boost :P

205's I know, but think cambered in and as low as possible

[driggers.a]

All about the looks. A+

[Dutchy]

205 is bigger then stock size anyways :P

[Dutchy]

Tires are coming in tomrrow morning, mounting them tomorrow after work.

Also started on modfying another set of struts, just need to weld on a new seat for the coilover sleeve.

I rolled the fenders front and back. Also pulled the front fender liners.

Now just need a stiffer spring for the rear and it should be good to go.

[B Rod]

Sounds good. Cant wait to see it!

[grippymonkey]

coming along...

I'm in love with E30's. I've had two.