Announcement

Collapse
No announcement yet.

68 Mercedes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • D&W
    replied
    Originally posted by martinm13 View Post
    If I understand what you are saying, I think I have the same issue. The little piece that keeps the door from swinging open too far has come detached inside the b-pillar in my car. What was welded to fix this?

    My odometer doesn't work either, I am way too scared to take it apart and fix it myself but I hear these guys do great work - http://www.paspeedo.com/
    You can get a new door check for about $50 from mercedes that bolts right in, thats what I did and it was perfect HOWEVER then the metal on the actual door where the bolts attach to started to stress and crack, so I had that bit welded so the bolts could 'grip' onto solid metal again on the door

    yea i heard there is a local guy also that will fix odo and gear selector indicator for about $200... trying to track down his contact details

    Leave a comment:


  • coconutt
    replied
    So clean...

    Leave a comment:


  • martinm13
    replied
    Originally posted by D&W View Post
    More a list for me to remember what was done and needs to be done as much as to keep this updated

    Just done

    1/ Front Airhouse 2 bags were swapped out for SS re-5 bags as they are a bit slimmer, allows more clearance and should eliminate the rubbing problem I was having
    2/ Front door was re-welded where door check attaches as metal was stressed and door check was pulling away from door

    Things to do for the next couple months

    1/ Install windshield washer foot pump and connect up. Thanks to buddy Dan for this part
    2/ Body points and fittings due for annual greasing
    3/ Troubleshoot in-op power window in rear
    4/ Paint is due for claybar etc and interior detail
    5/ Fix in-op odometer (if I think it's worth shelling out some $ to fix)
    If I understand what you are saying, I think I have the same issue. The little piece that keeps the door from swinging open too far has come detached inside the b-pillar in my car. What was welded to fix this?

    My odometer doesn't work either, I am way too scared to take it apart and fix it myself but I hear these guys do great work - http://www.paspeedo.com/

    Leave a comment:


  • P78
    replied
    Originally posted by D&W View Post
    Things to do for the next couple months

    1/ Install windshield washer foot pump and connect up. Thanks to buddy Dan for this part
    2/ Body points and fittings due for annual greasing
    3/ Troubleshoot in-op power window in rear
    4/ Paint is due for claybar etc and interior detail
    5/ Fix in-op odometer (if I think it's worth shelling out some $ to fix)
    6/ Take some super awesome feature worthy pics

    Leave a comment:


  • D&W
    replied
    More a list for me to remember what was done and needs to be done as much as to keep this updated

    Just done

    1/ Front Airhouse 2 bags were swapped out for SS re-5 bags as they are a bit slimmer, allows more clearance and should eliminate the rubbing problem I was having
    2/ Front door was re-welded where door check attaches as metal was stressed and door check was pulling away from door

    Things to do for the next couple months

    1/ Install windshield washer foot pump and connect up. Thanks to buddy Dan for this part
    2/ Body points and fittings due for annual greasing
    3/ Troubleshoot in-op power window in rear
    4/ Paint is due for claybar etc and interior detail
    5/ Fix in-op odometer (if I think it's worth shelling out some $ to fix)

    Leave a comment:


  • 07NJx355
    replied
    soo classy, well done sir.

    Leave a comment:


  • D&W
    replied
    Originally posted by willis View Post
    This car is absolutely perfect. Great job on everything!
    thanks man. i need to go and get some fresh shots of this thing. with a legit camera

    Leave a comment:


  • willis
    replied
    This car is absolutely perfect. Great job on everything!

    Leave a comment:


  • SD202
    replied
    Originally posted by rice4life View Post
    Live in SD and don't have a kill switch or lojack...

    Cutting it close buddy, especially with a nice car like this. The border is only a few miles south and any car is a target.

    My friend had his b20 teggy stolen a year ago in SD, and one thing he regrets is not having a measure to stop them. He thought that no one would want a car like his until it was too late.

    Its really not a big surprise at all that your buddies "b20 teggy" got stolen in San Diego county as Hondas, Toyotas, & Nissans are the most popular stolen cars in this area...... I dont know why on earth anyone who lives here for any amount of time and owns a rice rocket would believe that no one would want their car when you hear on the news and see the crime stats for the region you must know that they are the most popular stolen cars here. Especially an engine swapped one.

    Leave a comment:


  • 99sil-teg
    replied
    Damn nice Benz man

    Leave a comment:


  • w201e34
    replied
    You tempt me...

    Leave a comment:


  • D&W
    replied
    Originally posted by rice4life View Post
    Live in SD and don't have a kill switch or lojack...

    Cutting it close buddy, especially with a nice car like this. The border is only a few miles south and any car is a target.

    My friend had his b20 teggy stolen a year ago in SD, and one thing he regrets is not having a measure to stop them. He thought that no one would want a car like his until it was too late.
    Never really thought of it to be honest. might not be a bad idea. LoJak is expensive, is it legit or a scam?

    Leave a comment:


  • rice4life
    replied
    Live in SD and don't have a kill switch or lojack...

    Cutting it close buddy, especially with a nice car like this. The border is only a few miles south and any car is a target.

    My friend had his b20 teggy stolen a year ago in SD, and one thing he regrets is not having a measure to stop them. He thought that no one would want a car like his until it was too late.

    Leave a comment:


  • D&W
    replied

    Leave a comment:


  • 91LTI
    replied
    love it mate, so clean!

    Leave a comment:

Working...
X