1988 BMW. E30 Bay Area Box Beem. Newbie

[Zic]

http://www.stanceworks.com/forums/sh...ad.php?t=17715
in our very own FS section, the real deal. new wider lips and you are a hot stud

[88SuperEtaBD]

Those are only 1/2" wider than mine! I'm not all snobby about real/fake wheels. I'm down for esm's (fakes rs's). Same look, to the untrained eye, and my wallet can stay filled. Im a college student, money comes in, but I have a lot going out. Don't have 1000's to blow. Yet

I wanna work with what I have now. I also plan on getting a b6/b7 audi avant and bag it, so if I keep spending so much on my e30, I'll never get that. We'll see what happens.

[Zic]

e30 > audi

[Byron]

wow you need a 40 or a 30 series. 185/40/16

this is what you should do. measure the backspacing on the wheels without the spacers. then with them and see how many inches you have to play with between the fender/current rim setup

This is false, go with either a 205/45 or a 215/45. The wheels are too skinny to stretch anything and you say you want to autox it anyways. Neither will be stretched, but they won't be ballons like what you have on there. If you roll your fenders, you could fit a 25mm spacer on the rear and still clear fine.

[88SuperEtaBD]

This is false, go with either a 205/45 or a 215/45. The wheels are too skinny to stretch anything and you say you want to autox it anyways. Neither will be stretched, but they won't be ballons like what you have on there. If you roll your fenders, you could fit a 25mm spacer on the rear and still clear fine.

Fenders are rolled, waiting to figure out what spacers to get, along with tires. The 10 mm ain't cutting it, i know. I think i can use like 5mm more up front too. so would that make my final offset 10 in back and 15 up front? How's final offset work...

[88SuperEtaBD]

Small update, more to come. So far, I've only installed my little m-tech strip on the steering wheel. Got some M-tech flow in the car now It's all in the subtle details right?


Another thing I thought was really cool. My parking permit at school(SJSU) has a e30 vert on the back of the sticker.



So, today was a nice day and had some time to work on my car. I still have to install my adjustable cam gear, m50 injectors, and replace my drivers side headlight lens. (I have it). My fog light is cracked too and plan on getting new lenses for those as well. And I need to adjust them so they sit nicer in there.
Here's what i did today
masked off my car to touch up my valence cuz there were hundreds of rock chips.



Looks loads better
Then finally got some protection ejknights skid plate

Painted my iS lip

Attached Ryan G Splitter

Then installed on car I LOVE IT!



I'm low, i ripped off my lip within 10 mins of installing it backing out of my driveway. Sucks. I gotta be super careful now.

Just repeat, low and slow. Haha.

I did some measuring. I have 23 1/8" from ground to fender up front, 22" in rear. From ground to iS lip= 3.5" and skid plate to ground = 2.5".

But I am HAPPPPPPYYYYY!!!!!

I will get some better pics of whole car soon after I wash it, its filthy right now.

[88SuperEtaBD]

Will be picking up a e46 armrest and center console. Gonna retrofit it to fit. Or atleast try. It's been done before,so i know its possible Requires some cutting/fiberglassing/painting to make it look right, but it looks almost stock, when done right. Reason for it: Girlfriend hates the fact that my car doesn't have cup holders, I just tell her to stop bitching...but I **** that it doesn't have an armrest. So, this will make both of us happy. And i guess cup holders would be nice.

[Zic]

cup holders stupid Americans, the car is not a restaurant.

*tho, looking forward to see how it will turn out.