great work, nice project!
Announcement
Collapse
No announcement yet.
Das V8 Coupe Quattro
Collapse
X
-
Originally posted by stinkinrich View Post^^ that aimed at me?
The 20vT im on about is the one they put in the A4, S3, MK4 Golf etc so still a 4 cyl. And my cabriolet is the 80 B4 chassis to same front end as the coupe, saloon and avants.
Comment
-
this is what i am thinking....
oh ya plenty of room in here. i5 20vt is waaay better than i4 20vt..... but a v8 32vt...
Comment
-
Originally posted by stinkinrich View Postbut an i4 20vt is a straight forward swap right?
thanks guys! sometimes your own motivation is just not enough to build epic without others
Comment
-
small steps
alum subframe bushing test....need to get back to the bay clean
Comment
-
Ditched the 2 stage power steering pump/brake booster. need to get a mr2 electric pump
anyone have one for sale?
Comment
-
what did you use to clean the transmission? looks stunning from post 128-129sigpic
1990 Nissan fairlady Z32 - long term build
1982 euro porsche 930 turbo
"A less- assuming enthusiast probably wouldnt even think that this Z ran because of how naked the engine compartment was. The motor looks as if it just floats there, with nothing else in sight." Super Street 9/2012
http://www.stanceworks.com/forums/sh...ad.php?t=19185
Comment
-
Originally posted by 1badg35 View Postwhat did you use to clean the transmission? looks stunning from post 128-129
aluminum flat ceramic spray paint
haha, my buddy(4x4) came back to the garage one weekend and saw that and was like "wow that is clean", how did you do that. was not until he looked close
before the paint i used an oxidizer on the block/trans my other buddy in hvac uses to clean ac units. nasty stuff.
Comment
-
could lead to awesome...
Comment
-
1991 V8 Stock
3.6 liter, 32-valve, 90 (degree)
Bore: 3.19 in. (81.0 mm)
Stroke: 3.40 in. (86.4 mm)
Displacement: 217 cu. in (3.6 liters)
Compression Ratio: 10.6:1
Horsepower (SAE Net): 240 @ 5800 RPM
Torque: 254 ft. lbs. @ 4000 RPM
just on abt chip 280chp, limited by 14.6lb injectors.....
1992 Audi V8 DTM
Specifications
Displacement 3561.8 cc
Bore and Stroke 81mm x 86.4mm
Torque 380 Nm at 7000rpm
Output 470 bhp at 9500 rpm
Last edited by dspl1236; 11-07-2011, 11:53 AM.
Comment
-
1.8/2.o 16v stuff
ordering 2x of these....
Comment
Comment