Everyone does turbo swaps to build S2 reps....I decided to go V8..... 
One of 1700 some imported '90-'91
'91 CQ - was I5 20v 2.3 165hp
'91 3.6 V8 90k 240hp 280hp@chipped
New plugs, t-stat, knock sensors, gaskets, t-belt
3.6 5 Speed cams
Throttle body modded for quicker response - no more stock intke
Reset cluster to zero
Battery relocate
Ground Control coils w/ Koni adj.
Modded trans bell housing, trans to motor spacer
New clutch slave
034 V8 flywheel insert
'97/8 A8 auto flexplate/starter ring
Spec Stg2 unsprung kevlar disk
New oe motor mounts on subframe
New front CV's
New Depo euros headlights
DTA Pro P8 standalone - pending a swap
MKVI 2.0tfsi coilpacks
.:R36 wire covers
MkIV 1.8t coil pack replacement harnesses
034 track density trans & diff mounts
034 density diff mount
034 f&r aluminum subframe bushings
034 f&r delring control arm bushings
'09 Kawasaki 1400gtr itb's
Griffin aluminum Jeep Grand Cherokee radiator
So here is the progression since Sept '10






3.6 auto flexplate spacer
3.7 flexplate/starter ring
034 flywheel insert
Spec unsprung kevlar disk
cq pressure plate








22mm to 29mm brake master upgrade

little throttle body modding for quicker fast












One of 1700 some imported '90-'91
'91 CQ - was I5 20v 2.3 165hp
'91 3.6 V8 90k 240hp 280hp@chipped
New plugs, t-stat, knock sensors, gaskets, t-belt
3.6 5 Speed cams
Throttle body modded for quicker response - no more stock intke
Reset cluster to zero
Battery relocate
Ground Control coils w/ Koni adj.
Modded trans bell housing, trans to motor spacer
New clutch slave
034 V8 flywheel insert
'97/8 A8 auto flexplate/starter ring
Spec Stg2 unsprung kevlar disk
New oe motor mounts on subframe
New front CV's
New Depo euros headlights
DTA Pro P8 standalone - pending a swap
MKVI 2.0tfsi coilpacks
.:R36 wire covers
MkIV 1.8t coil pack replacement harnesses
034 track density trans & diff mounts
034 density diff mount
034 f&r aluminum subframe bushings
034 f&r delring control arm bushings
'09 Kawasaki 1400gtr itb's
Griffin aluminum Jeep Grand Cherokee radiator
So here is the progression since Sept '10






3.6 auto flexplate spacer
3.7 flexplate/starter ring
034 flywheel insert
Spec unsprung kevlar disk
cq pressure plate








22mm to 29mm brake master upgrade

little throttle body modding for quicker fast












Comment