We can rebuild it. 91 Golf

[voorhees]

im addicted to this build real nice work...... freekin good!!!!!!!!!!

[P78]

i love restoration build thread, you have some serious skill

understatement

[ImAwesome]

i love restoration build thread, you have some serious skill

[oldmansmitty]

Dave it keeps getting better and better. Great workmanship and good momentum with your project.

[renngolf]

wow this is inspiring!! coming along awesome. canada - fuck ya! *insert song here*

haha thanks.

Put seam sealer along the inside of the arch lips and anywhere else it was needed on the bottom of the floors and inside the rear apron.
The quarters are..id say about 85% smoothed now alone with the rear apron corners.
Close to that stage where I can top it off with glaze and get it done.
I also decided to delete the rear center badge. The indent is far too deep to fill so had to weld it in first. Closed it off with weld and did a thin coat of filler over.

[C.Johnston]

wow this is inspiring!! coming along awesome. canada - fuck ya! *insert song here*

[renngolf]

Wow man just read the whole thread. Very impressed.

Thanks man.

are you going to have this at vagkraft this year, I would love to see this thing in person (I'm down in niagara, not far from you)

I really don't think it will be done by then

Took a break from sanding body filler and put in some time into the rear portion of the floors.
At times like this you really wish you had more room and a rotisserie to flip the car over but you gotta work with what you have.

Piece of crap exhaust hanger and bracket



The remains of the hanger and the intermediate fuel pump bracket.


Intermediate bracket studs. I ended up cutting the nuts off and after cleaning it up the stud bases were still good so I decided to leave them in to see if the mk3 fuel filter housing can bolt up to it. if not ill just end up cutting them out and weld in some new studs for the housing.


First few pics showing the bare floors with the rust spots being grinded out with a wire wheel. The bare spot to the left is where the previous hanger bracket was.






I used this stuff called Blue Steel (marine product) to convert the rust in the pits. Goes on creamy white and turns into a blackish blue colour after it reacts and acts as a primer afterwards.



I started looking around for something to make an exhaust hanger out of.
Baby seat restraint bar.









Mixed some epoxy primer later and went over the spots from the previous day.




Previously fucked corners




passanger side


drivers




Really glad this stage is almost done. Once it dries some areas still need seam sealer, paint and rocker guard. Then its back to the smoothing the arches.

[JuniorB]

are you going to have this at vagkraft this year, I would love to see this thing in person (I'm down in niagara, not far from you)

[NorCalFocus]

Wow man just read the whole thread. Very impressed.

[Mr Ganja]

For the love of the Game.

[renngolf]

zing! I forgot who i was talking to lol

yes its on its way.

Nice man. replacement door?

Tell Aaron to get that beetle finished.

Holy shit this fucking guy.

Incredible work.

Thanks Dave.

Lame update.

Got the windshield lip in epoxy primer. Much better than shitty rust.
The a-pillar part got covered in the same stuff. The drip rail trim will cover the channel and the door covers that lower a-pillar spot so Im not bothering to smooth anything out. Its just going to get painted.





This is the part that sucks bag. All the welded seams got a coat of everglass. Topping it with evercoats z-grip. Once im satisfied with it ill throw some metal glaze over it and finish it off. **** working with bodyfiller. I think ill be taking a break from it and painint the wheel wells and rear floor portion soon.

[Dave_The_BMXER]

Holy shit this fucking guy.

Incredible work.

[impulse byer]

zing! I forgot who i was talking to lol

yes its on its way.

[no vtec 4me]

damn dude my mk2 looks perfect compared to how you picked yours up. Youre doing a fucking sick job fixing it up though

[Evil Panda]

:O