'08 Black Nissan Sentra Spec V

[medievalb16]

Alright thanks guys
I have the springs cut already like 1 1/2 in the front and 3/4 in the back so idk if ima go any lower cause I dont want no damage to the body. Going to save up for some coils than

[staytuned05]

to each his own, but i say NO to the matte black. everybody is doing it and u wont stand out. maybe a Sentra will a little bit, but i rather like matte bronze/gold wheels on a gloss black car.

and from my experience with my 05 Altima, ALWAYS lower first. slam as low as u can, then u can go around shopping for used rims and trying them on at the peoples houses. thats what i did for a while, then u can see if rims are too big, too wide, or like me just need a slight fender roll and stretch tires. my best fitment i had on my 05 altima were 18x9.5 35 offset. i never got around to getting my Tein coilovers low enough to sit on stretched 225/40/18s so i sold the rims, and car is now stock. waiting on a next project

[medievalb16]

Ok gotcha
I know they sentra guys use the 350z rims and they sit pretty flush but idk lol i want lip and a little poke so I can roll my fenders out a bit.
But yea I want the matte black cause none of the sentra guys have and i would think it would look pretty aggresive with some gold or bronze rims... but than again i look at the car and im like "damn love that shine that the black gives off after a fresh clean" lol but still want to research and have my thoughts open for new suggestions and tips.
New to the stance scene and want to learn as much as possible

[JasperThomas]

Is yours the se-r spec-v? My buddy drives one, it's surprisingly fast. The 2.5 sounds really good with a better intake and exhaust.

[Chase Otter(:]

Lowz before dah wheelz!

[medievalb16]

yea they do sound monstrous with the intake and exhaust. My boy had the MR20 motor which is the 2.0 sentra and he put the fujita intake and when he red lined it the motor was so loud that you can feel it vibrate on your clothes lol... nasty my dude

on another note yea ima go LOWEZ as ffff lol

[medievalb16]

photoshoped xxr rims... not very good with photoshop but i want the car to lower than this in real life though lol and its going to have the front lip and still debating with matte black or keep the gloss

[Bracknaphobia]

I'd love to see some crazy fitment out of this car. It would look badass IMO. These are so different from the b15's.

[medievalb16]

Haha now you know what i mean but what you mean by crazy fitment ? i was thinknig of rolling out the flat part of the fenders to get wider rims and hopefully go low

[Bracknaphobia]

i was thinking of rolling out the flat part of the fenders to get wider rims and definitely go low

*fixed

Just lower it first, get used to it, THEN worry about the fitment.

[medievalb16]

Haha cool will do will do

[cardoza]

Save your money on a flat spray job and spend it on suspension goodies.

[OSSHWA]

I really like this year Sentra, and seldom see them done up. That being said....it has potential.

[baute]

I have been reading and you all recommend low first and then try to fit wheels, this need not be a rule ..
if first get the car low to the maximum and then not have enough room to get a good wheel there are two options, get a smaller wheel or get up again ..
if you get the wheels first (if it is a conscious choice and measuring) can then lower the car to the limit that will allow the wheels.
so you choose the wheels in function to the aesthetic appearance of the car in general, are not choosing the only measure that the car will let you
for me is much more valuable a well chosen overall result, that the car look at ground level but carry wheels 15 " or 7,5" because it will not fit other...

sorry if you do not understand what I wrote, google translator

[medievalb16]

Yea this year sentra has to be by far my favortie year... my 02 was pretty raw but when i saw this car in my mind it had a bigger canvas in customization...
But yea baute i get what you mean, its just the last part i didnt understand entirely with the 15" and or 7,5" measurements