If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hope you guys are ready for some poorly lit cell phone quality pictures!
So I found some corner lip things from a 90's BMW 7 series. The corners unbolted, but the center piece was molded to the bumper cover. This is what I was left with.
I wanted to fill the gap in the center, so I found a CB7 accord lip in the junk yard, and cut it up.
Then I threw on some paint and bolted it all down.
Also, found out that 6x9's fit in the factory speaker covers with some light dremel work. So in went some 3 way Polks
Also also, put some meguiars back to black on my old mud flaps, which was just what that old thirsty honda rubbery plastic needed
Still working on the lip. The corner pieces are from a 7 series, I forget which one. And the "new" carb is actually the oem carb the car came with. I had another carb on it that was oem but jetted and stuff. This one is less aggressive but since it's getting colder out, it actually runs better now.
Leave a comment: