2008 Ford Falcon

[Tocchi]

here is my 32.

was chasing wider rears, so please forgive the offset fail on the rear. damn overfenders!!!








engine hardware:
R34 RB25 Neo motor
Garrett GT3582 turbo (front A/R 0.7, rear A/R 0.82)
Tial 38mm wastegate + screamer pipe
Highmount steampipe turbo manifold
genuine GReddy inlet manifold
R33 Power FC computer
Nismo 740cc injectors
Sard fuel regulator
Bosch 044
VH45 V8 throttle body
Koyo Racing aliminium radiator
600x300x75 intercooler
3 inch stainless piping
300zx afm
Blitz bov


drive line:
HKS twin plate clutch
R33 RB25 gearbox
single peice tailshaft
GTR diff with Tomei 2 way centre
GTR axles and hubs
R32 GTR brakes
Tein caster rods
Cusco rear camber arms
hicas lock bar
Buddy Club racing coilovers


body wise:
D Max vented carbon bonnet
D Max 35mm wide rear guards
genuine GTR fenders
genuine GTR front bar
GTR corner lights
carbon GTR rear boot lip
WRX WRC blue paint
4x 17x9 +17 Works CR Kai
2x 17x9 +16 SSR Professor SP1


interior:
Bride fixed back seat
Monkey Warehouse floor brace
gauges
limo tint
full 6 point bolt in cage

[Rufio]

Ford Australia has long designed and built many Fords here in Aus. Same as Holden, Holden designs and builds many cars that end up in the US (Correct me if I'm wrong though, but current VE ended up as the GTO over there, same as the Monaro?)

[Bracknaphobia]

Your cars are sweet. I definitely love the volks on the falcon, but I also think it needs an 18" wheels to look its best when it's not on the track.

[Oxer]

whats JDMST? im kinda newb to these american based sites etc

jdmstyletuning.com

Aussie site dude

[dubtruk36]

Ford Capri is an absolute classic over her in SA.
Yours is about the baddest-arsed example I've ever seen, FTMFW!

[180roman]

mmm... good to see someone doing something right on a ford in Aus

and good to see more Ausies on the site

[Tocchi]

Your cars are sweet. I definitely love the volks on the falcon, but I also think it needs an 18" wheels to look its best when it's not on the track.

FML ... my daily rims look small even though they are 19s lol

jdmstyletuning.com

Aussie site dude

cheers googled it earlier

Ford Capri is an absolute classic over her in SA.
Yours is about the baddest-arsed example I've ever seen, FTMFW!

thanks

mmm... good to see someone doing something right on a ford in Aus

and good to see more Ausies on the site

cheers


and here's what happens when i get bored..

[Tocchi]

getting the car ready for this weekends tarmac rally. car gets scrutineered on saturday so ill get my event decal and number then.
in the meantime, the car has got all the sponsors decals on it

Anytime Towing
sbec ROV services
GT Graphics
Minimitchphotos.com
Everydayhero / sids for kids (charity)

[Oxer]

Needs some SW stickers on it

[apuapina]

wtf is this. a ford? srsly? in europe fords are like 1,6 liter garbage cans with front wheel drive and they are ugly as fuk. im liking dis. and thumbs for the r32. they are win.

[runningpanda]

Awe-some.

[BMWinAUS]

Here is a photo of the previous model Falcon. Not SW style but nice none the less

And nice car dude, there so nice too drive also

[Tocchi]

interesting taste that BA falcon owner has ^^ haha :P

here's another model Ford Aus do, its a 2006 BF Typhoon, turbo 6cyl 4L (GT3540, internal gate version of the GT3582), same motor as in the drag car.





and this is the 2009 FG 310 ute. Turbo 4L again.


fits 31x13 R15 under the guards haha

[Tocchi]

still unsure to go 245/40 or 245/35
fronts are 40, rears are 35
rear still needs more low

[Tocchi]

not much to update, but once the shops open up again from the Xmas/NY's break, it's going into WA Suspensions to get the camber kits for the front and rear, and all the front end bushes getting replaced with aftermarket (nolathane) bushes that are firmer, so ill have better turn in at the track.

and the good part, getting the adjustable base plates modified on the Teins (just rears) so i can lower it more


once i get back from Japan it goes in for the exhaust mods, then the carbon fibre airbox.
it's also getting a tune at Monsta Torque (X-cal 3, raising rev limit from 5800 to 6600, replacing soft limiter with a hard limiter, removing torque tags, setting up a 2 step limiter.. and just a tune for 98ron at the moment, E85/toulene can come later)


hoping to get it this low alround .. (car is squatting, thus the rear looks lower)