Hmm so who is going to be the next owner of the USDM plates......
Announcement
Collapse
No announcement yet.
Aussie FOR SALE Thread!
Collapse
X
-
BBS LM 19x8.5/10
copy and past from another forum.
only had these 5mins, but the money i have put in to these are holding up other plans.
so...
5x108 19x8.5 et55 with a falken 452 215/35
5x108 19x10 et52 with a falken 452 235/35
comes with 5x100-5x108 adapters in 2x15mm, 2x20mm, 2x25mm all hardware included
so since I purchased these i have given them a quick clean, purchased the 15mm adapters, and stripped the old 245/35 p zeros and fitted the 235 falkens
At GAF i ran these with an additional 1deg of camber in the rear, 25mm up front, and 20mm adapters out back. for those not wanting to add additional camber (which i originally planned) the 15mm adapters in the rear should work fine and i think you will have ~1-2mm less poke.
adapters will come with the nuts i received which each respective adapter, not the black JDM ones in my pics, however i will include these for the right price.
the front left tyre has some heavy rubbing to the outside of the tread
i still have the pair of 245/35 pzero tyres for the rear, these can be included in the sale for a extra cost
i am looking to get back most of what i have spent on these, offers over $2400. can help with postage at buyers cost. from memory i paid $120 from sydney to bairnsdale. Can also drop off to melbourne east pending a deposit
and for the selling points:
Sarcasm is easily calculated on vortex dude. Take 4 parts GLI lip and divide by BBS RS. If you are left with a remainder, subtract it from omgmoarlow. Profit.
Comment
-
Up for sale my R33 details as follow
R33 1996 series 2 imported 09 with 56,000k's by Autoworx
currently sits on 86,1xx K's had about 76,xxx when i purchased it.
Always runs on 98 octane.
guy I got it from had just had the 100,000k service done at Allstar and a dynorun/safe tune. Have receipt.
engine:
Greedy front mount kit
Apexi pod
Whiteline engine strut brace
Xforce TBE 3"
Greedy profec b 2 set at low 7psi high 11psi
Blocked bov port. Have factory Nissan bov
Bosch 0440
made 278 at allstar on 11psi
Inside/outside:
Recaro reclinable drivers seat has tear in side. Have stock seat.
Nardi copy. have stock wheel.
Nismo shifter. have stock
C's short shifter
Apexi afc neo
Alpine deck with iPod cable coming from glove box
Jvc 2way 6"
Kicker 'kickpack' sub and amp
Calibre boost and water gauges
Factory Nissan boot strut brace
Auto watch alarm remote entry built in turbo timer
Tinted glass
Nissan rain guards
Front lip
nismo clear indicators
Work xc-8 18x9.5 +20 - don't recall measurements on tyres
New rubber up front rears are getting low but above indicators.
susp/handling/driveline
Tien super street coilovers
Hicks lock bar
White line heavy duty sway bars
Camber arms
Caster rods
Rear sub frame bushes
Mechanical diff (unsure of make or 1.5/2way came from Bangas old drift car its noisy and clunky but locks good). still have stock v-LSD
Dba 4000 series slotted front rotors New front pads
New clutch. don't remember make was about 400$ for the plate.
Lightened fly wheel
possibly other suspension components I'm missing.
Everything installed by the gents down at JPC
the car is pretty neat and presents real well engine bay is oil free and I've had no mechanical problems.
As for the bad the tacho has gone mental and shows what ever RPM it feels like, I've not fixed this yet as it apparently requires replacing the cluster and i'm not keen on putting one in displaying 25 million k's.
few little dents on the body nothing major thanks to muppets in carparks etc.
I also recently managed to rear end a Rav4. not moving very fast I punched it in the ass bending my bonnet, rad support smashing headlights and fucking the rad etc it has all been fixed under insurance via Justcar (that carries lifetime warranty).
can supply pictures of the damage but shes all diamonds now.
Chasing $14,000
Untitled by Kerelm, on Flickr
IMG_4286 by Kerelm, on Flickr
IMG_2143 by Kerelm, on Flickr
IMG_4419 by Kerelm, on Flickr
IMG_4234 by Kerelm, on Flickr
IMG_4229 by Kerelm, on Flickr
IMG_4415 by Kerelm, on Flickr
IMG_2774 by Kerelm, on Flickr
IMG_4238 by Kerelm, on Flickr
Hit me up here or on 04319 44187
Thanks
Jesse.
Comment
-
anyone got some 17x6.5 BBS RS barrels for sale or swaps? I've got some spare 17x7.5s
need a pairSarcasm is easily calculated on vortex dude. Take 4 parts GLI lip and divide by BBS RS. If you are left with a remainder, subtract it from omgmoarlow. Profit.
Comment
-
Originally posted by dylan8 View Postanyone got some 17x6.5 BBS RS barrels for sale or swaps? I've got some spare 17x7.5s
need a pair
i'm actually looking for something wider like 7"ishDrinking Enthusiast with a Car Problem
Comment
-
Originally posted by 180roman View Postactualy i think mine are close to around that size, they are somewhere around 6", so i've gota measure them
i'm actually looking for something wider like 7"ish
Im pretty confident i need some 6.5s but ill check. trying to make one set of cool and perfect fitting RS out of 2 and a bit sets is doing my head in.Sarcasm is easily calculated on vortex dude. Take 4 parts GLI lip and divide by BBS RS. If you are left with a remainder, subtract it from omgmoarlow. Profit.
Comment
-
Originally posted by dylan8 View Postwell if your interested in a swap let me know. mine are still bolted together atm but not being used.
Im pretty confident i need some 6.5s but ill check. trying to make one set of cool and perfect fitting RS out of 2 and a bit sets is doing my head in.
here is a photo i took for lols when putting together 2 inner barrels to make a wheel
as you can see the inner barrels are 6", so let me know if that will suit your applicationDrinking Enthusiast with a Car Problem
Comment
Comment