W210 from southwest Virginia

[Mav3rick]

I picked up a 99 e300 om606 for a good price, so far I've had to put a radiator and new seals and copper washers in the injection pump because of leaking, it needs a new bumper, but I am saving money for 8mm pump elements, egr delete, and manifold so I can run the hx40 I have, I'm hoping to lower it soon and put a set of staggered 18s on it, I want a decent stance but still want enough tire to hold the power I wanna make. Here is the ugly duckling lol

[Mav3rick]

Fixed my exhaust temporarily, sounds alot better, and found out the previous owner had 3 of those coil spring lift block things you screw in, removing them tomorrow and might cut a coil off each spring this weekend, anyone have any 5x112 wheels around the va area for sale too?

[Rancid]

Good start so far! Polish up those headlights and it'll look 100x better!

[Mav3rick]

Just did after I did the exhaust lol, I wanna order the clear black housing projector ones and paint the inside to match, and I know a guy that put some flares and spacers on his wagon and it's super Sexy

[DaleJK]

Yes another Merc build, im excited to see how this turns out

[Mav3rick]

Hopefully will have some wheels this weekend or next, moneys a little tight but come on side jobs and tax time lol

[Mav3rick]

That is kind of the goal but a little different, but I was wondering if anyone knew this car or knew the wheels specs, they looked like rota's and the only ones I could find are 18x10f and 18x12r and Idk if I'd be able to clear them and I'd have to run wobble bolts or adapters

[P78]

depending on offset you should be able to run 19x11



this is 19x11 (with rolled rear arches)



19x11 +9

[Mav3rick]

Thanks, I'm kinda wanting to keep 18s so I can have a little more meat, but I found some 18x9.5 cosmis racing wheels for 800 with tirespect but there 5x114.3 and I would need wobble bolts, all the good wheels I find I'll need to run wobble bolts witch means I can run spacers

[loekaaz]

Stay with 18's
The fitment pic of yours looks on point

[Mav3rick]

That one with the rota's looks awesome I just need to see if I'd be able to fit them, there 18x10 front and 18x12 rear and 5x114.3 so I'd have to run wobble bolts

[loekaaz]

Oh, a little tip:

If you want update your car/thread, I would suggest creating a 'build thread' in this section

[blink_me92]

W210 are one of the best platform to snug wide wheels in my opinion. Bare in mind that most of the pics below was done by pulling fenders with fender rollers.....and my car has always been static..no air

just for your reference, here is my past w210...let me know if you want more info and sorry for whoring your page....

Here is 19 9.5 front and 11 - no rub at all the et was around 15ish all around.





here is 18 9.5 and 11.5 et around 20 all around.

[Mav3rick]

Man that looks awesome, I just ordered the 14-12 stud conversion so I can run 5x114.3 wheels and I'm hoping to snag some decent wheels this weekend and get my new bumper painted too

[Mav3rick]

I found some wheels 18x9.5 front +12 and 18x11 rear +10 do you think the would fit?