W210 from southwest Virginia

[superturbodiesel.com]

go 18"...much better looking than 19 imp.

[blink_me92]

I found some wheels 18x9.5 front +12 and 18x11 rear +10 do you think the would fit?

Hey, yes they should work. I ran 9.5 in the low 10s before and for the my MAE was around 11.5 et 23-25 so the rear with 18x11 should snug with no problem at all.

However, if I can chime in more, the front fenders on these w210 platform are not strong and I have riped a fender before,...so make sure u alway ROLL fenders and not cut any of the "meat" away. Fender rollers works best and you an always pull with enough heat and muscle

Also, I have never was fond of coilovers on these cars, I heard the K2sports go low, but I doubt it. So most of the time is used lowering spring (a bunch that ranges from lorinsers, eibach), however what suits me best was using cut Lorinser springs and coupled the front struts with w202 yellow bilsteins and w124 eibach/sachs shocks in the back. car does not bounce and purrrr like a kitten when it drives.

[Mav3rick]

Starting a build thread

[Mav3rick]

I found some wheels 18x9.5 front +12 and 18x11 rear +10 do you think the would fit?

[Mav3rick]

Man that looks awesome, I just ordered the 14-12 stud conversion so I can run 5x114.3 wheels and I'm hoping to snag some decent wheels this weekend and get my new bumper painted too

[blink_me92]

W210 are one of the best platform to snug wide wheels in my opinion. Bare in mind that most of the pics below was done by pulling fenders with fender rollers.....and my car has always been static..no air

just for your reference, here is my past w210...let me know if you want more info and sorry for whoring your page....

Here is 19 9.5 front and 11 - no rub at all the et was around 15ish all around.





here is 18 9.5 and 11.5 et around 20 all around.

[loekaaz]

Oh, a little tip:

If you want update your car/thread, I would suggest creating a 'build thread' in this section

[Mav3rick]

That one with the rota's looks awesome I just need to see if I'd be able to fit them, there 18x10 front and 18x12 rear and 5x114.3 so I'd have to run wobble bolts

[loekaaz]

Stay with 18's
The fitment pic of yours looks on point

[Mav3rick]

Thanks, I'm kinda wanting to keep 18s so I can have a little more meat, but I found some 18x9.5 cosmis racing wheels for 800 with tirespect but there 5x114.3 and I would need wobble bolts, all the good wheels I find I'll need to run wobble bolts witch means I can run spacers

[P78]

depending on offset you should be able to run 19x11



this is 19x11 (with rolled rear arches)



19x11 +9

[Mav3rick]

That is kind of the goal but a little different, but I was wondering if anyone knew this car or knew the wheels specs, they looked like rota's and the only ones I could find are 18x10f and 18x12r and Idk if I'd be able to clear them and I'd have to run wobble bolts or adapters

[Mav3rick]

Hopefully will have some wheels this weekend or next, moneys a little tight but come on side jobs and tax time lol

[DaleJK]

Yes another Merc build, im excited to see how this turns out

[Mav3rick]

Just did after I did the exhaust lol, I wanna order the clear black housing projector ones and paint the inside to match, and I know a guy that put some flares and spacers on his wagon and it's super Sexy