Random Thread V2.0

[Average_Jerk]

Sold some shares back home, that should cover wheels and tires if I bring the money over here.

See what happens, but hopefully rolling on new tires and wheels by the end of next week.

WCI wheels?

[SebastienPeek]

Nah, some original Porsche BBS RS'

Want to go meaty tire look etc and lower it, but coil over setup for this car is super fucking expensive.

[SebastienPeek]

Might just wind the torsion bars a few outer clicks and call it a day, but see what happens.

Front is easy to bring down, the rear requires taking spring plate off etc and that's a pain in the ass.

[Average_Jerk]

Might just wind the torsion bars a few outer clicks and call it a day, but see what happens.

Front is easy to bring down, the rear requires taking spring plate off etc and that's a pain in the ass.

sounds like a lot of work lol

[SebastienPeek]

It is a decent amount for not much gain, but will see how the 16's fill out the arches.

I really just want to drop it about an inch and a half to get it euro height, but see what happens when the 16's and tires are on. Hopefully no camber is necessary on the rear, but have a feeling it'll be a tight fit.

[Average_Jerk]

It is a decent amount for not much gain, but will see how the 16's fill out the arches.

I really just want to drop it about an inch and a half to get it euro height, but see what happens when the 16's and tires are on. Hopefully no camber is necessary on the rear, but have a feeling it'll be a tight fit.

get a bigger hammer?

[SebastienPeek]

Really don't want to modify the arches if I can get away with it, I really want to keep it as narrow body as possible.

Something about narrow body and meaty fitment really does it for me.

[SebastienPeek]

Take for example, Magnus' 67S.

[Average_Jerk]

Really don't want to modify the arches if I can get away with it, I really want to keep it as narrow body as possible.

Something about narrow body and meaty fitment really does it for me.

my last day at work in seattle one the sales guys was talking about how he wanted to lower his car. so while I was packing I came across my 6" dewalt grinder. told him I'll cut his springs real quick before I move. he wasnt into it

[Average_Jerk]

Take for example, Magnus' 67S.

looks pretty alright

[SebastienPeek]

my last day at work in seattle one the sales guys was talking about how he wanted to lower his car. so while I was packing I came across my 6" dewalt grinder. told him I'll cut his springs real quick before I move. he wasnt into it

Ahahaha that would have been hilarious though, just two coils please...

[SebastienPeek]

looks pretty alright

I figure if I can stuff as much tire under the rear guards I'll be relatively happy. See what happens, 205/55/16 all around should give it a very different look straight away.

[Average_Jerk]

Ahahaha that would have been hilarious though, just two coils please...

I was like "come on man. just buy me a coffee and I'll slam the shit outta your car"

[SebastienPeek]

I would have just taken the springs out completely and called it a day

[Average_Jerk]

I would have just taken the springs out completely and called it a day

He was all like "its a 2017 with no miles on it waaaahhhhhh"