Wheel Sizing Help For My 350z!

[Kennyy]

hey guys so I'm ordering new wheels again and this time they're forged custom sizes/offsets but i need help.
I was running 18x11 all around and then i traded for 18x9.5 cause they'd be easier to sell blah blah blah long story short right now my wheels are 18x9.5 +10 with 20mm spacers in the rear, and 18x9.5 +10 with 27mm spacers front.

My next wheel setup is going to be double staggered so I'm gonna do 18's front 19's rear.

So since the wheels I'm getting are built to order i need to know how to get to my same fitment now without spacers, my general question is what wheel sizes do i get if i want the exact same fitment as now just without spacers

front 18x9.5 +10 27mm spacers
rear 18x9.5 +10 20mm spacers

new wheel setup will be
front 18x? +?
rear 19x? +?

can someone please help me out i have to order my wheels this week cause i need to have them before wekfest so the sooner i know the specs i need the better


thanks so much in advance

[Titty]

You never mentioned the widths you want. If you keep your sizes 9.5 all around, then it will be

18x9.5 -17
19x9.5 -10

If you want different widths.....

Here are other widths, all of the below will sit the same as your current.

Front Options
18x10 -11
18x10.5 -5
18x11 +2
18x11.5 +8

Rear options
19x10 -4
19x10.5 +2
19x11 +8
19x11.5 +15
19x12 +21

Choose a front width, and choose a rear width. So if you wanted 18x10 -11 front, 19x11.5 +15 rear, that's what you order.

[austindavidg]

That would be Front : 18x9.5 et-17 and Rear : 19x9.5 et-10

Basically spacers are subtracting offset. So say you needed 10mm spacers. It would equal out to a 0 offset with your original +10 wheels you have now.

Hope that helped!

[Kennyy]

You never mentioned the widths you want. If you keep your sizes 9.5 all around, then it will be

18x9.5 -17
19x9.5 -10

If you want different widths.....

Here are other widths, all of the below will sit the same as your current.

Front Options
18x10 -11
18x10.5 -5
18x11 +2
18x11.5 +8

Rear options
19x10 -4
19x10.5 +2
19x11 +8
19x11.5 +15
19x12 +21

Choose a front width, and choose a rear width. So if you wanted 18x10 -11 front, 19x11.5 +15 rear, that's what you order.

THANK YOU SOOOO MUCH !!! Exactly what I needed thank you!!!

[Kennyy]

That would be Front : 18x9.5 et-17 and Rear : 19x9.5 et-10

Basically spacers are subtracting offset. So say you needed 10mm spacers. It would equal out to a 0 offset with your original +10 wheels you have now.

Hope that helped!

Thanks so much for the help! You guys are awesome