Announcement
Collapse
No announcement yet.
Stanced Trucks?
Collapse
X
-
-
Originally posted by thesaddestlion View PostHow much drop do you have front/rear? i picked up a black 1992 Ranger a week ago and I like the stance you have, but I'm thinging of going for less front camber and more poke, maybe with screw on flares.
heres mine, as I got it:
hoping to get some 1995 mustang wheels and good tires, as well as the 'stang front seats today. I have to finally get it registered on monday, then get an alignment, tune up, and fix the sloppy shifter. then it'll get low. might have extra money for a 3/5 cheapo drop kit soon.
I'm keeping it beater, theres some nasty rust through in the floor pans that I'll fix but otherwise fuck it
Comment
-
Originally posted by LOCALTHIRTEEN View PostDamn everyone's looking good. That srt is nuts. Just looked through your build. Clean work my friend.
Comment
-
Originally posted by slcs10 View Post
Comment
-
Originally posted by slcs10 View PostNew to the site, this is my 1st gen daily driver.
Comment
-
What size tires are you running in this picture? What size are you running now? Im sitting at about a 6/7 drop. Spindles cut drop springs in the front. Just picked up a new set of beltech street performance shocks to help out my springs from collapsing every bump.lol My rear set up is pulled leaf and 4" angled blocks. All bumpstops are gone and shaved. Im working on a set of 16x8 Gta mesh wheels I am refinishing. Im thinking im gonna run 195-50-r16s. My front inner fenders have been cut and removed. My final offsets will be -10 front and -26 in the rear. I still may have to do some fender rolling and cutting. So stoked!!
Comment
-
Originally posted by LOCALTHIRTEEN View PostWhat size tires are you running in this picture? What size are you running now? Im sitting at about a 6/7 drop. Spindles cut drop springs in the front. Just picked up a new set of beltech street performance shocks to help out my springs from collapsing every bump.lol My rear set up is pulled leaf and 4" angled blocks. All bumpstops are gone and shaved. Im working on a set of 16x8 Gta mesh wheels I am refinishing. Im thinking im gonna run 195-50-r16s. My front inner fenders have been cut and removed. My final offsets will be -10 front and -26 in the rear. I still may have to do some fender rolling and cutting. So stoked!!
Local,
I saw the thread on your truck and now I am itching for some GTA wheels. I am already running a 16x8, but I think the ZQ8s have a different offset. I did roll the fenders in the rear, but that was partly because I kept 235-55-16s back there, with 205-50-16s on the front.
Comment
-
Originally posted by silverstonepgt View PostAll you static guys look pretty sweet. I want to get a better stance, but I think with bags I am too low to poke them out any further.
Local,
I saw the thread on your truck and now I am itching for some GTA wheels. I am already running a 16x8, but I think the ZQ8s have a different offset. I did roll the fenders in the rear, but that was partly because I kept 235-55-16s back there, with 205-50-16s on the front.
I was anti-bags with my mk3 for the first 4 years wih the car. I bagged it the last year I had it. I loved being bagged but for my daily driving and winter driving It made me un easy. I will bag the truck if I end up with another car to drive at some point.
Comment
-
225/55s in the pics you quoted and at the moment 225/50s. i have 1" spacers in the rear to help with the stance,had to do some cutting to make the wheels fit.without the flares the wheels poke hence the reason i have them.
I also want to upgrade to the street performance, the nitro drops 2's are too soft.
and you're ridiculously low,how do you drive like that?
Comment
Comment