CHEAP MAGNESIUM!!!!!! BBS E50 content

[Esteban]

Selling a set of 4 15" BBS E50 wheels off s 70's Denkon Monza IMSA racecar. The sizes are a little aggressive but you can buy used barrels from Bob Woodman anyways. 2 wheels have been restored while the other 2 still need blasting/paint/polish. Buy as is, Im pricing these very cheap to sell them quick. Straight, no cracks or rash. You rarely see E50's out there and a complete set priced below 1K is unheard of nowadays.

Complete set as is $800 :
Located in Riverside, CA
Can ship at buyer's expense


2 complete front wheels
-4x4" bolt pattern centers (4x101mm)
-5.5" outer barrels
-6.5" inner barrels

2 complete rear wheels
-5x5" bolt pattern centers (5x127mm)
-8" outer barrels
-9.5" inner barrels

[Esteban]

BUMP

................................For all inquiring minds..........................

You can buy used inner/outer barrels from Bobwoodmantires.com

To make these a workable size you can buy 2 inner and 2 outer barrels for the rear wheels to make them 15x10 or something. Each used inner/outer barrel costs around $90, so $360 total. Plus Bob Woodman buys used barrels as well so that can take a chunk off the price. You have to call them to get the available 15" sizes cause all they have posted online is 16" and up.

As for rear adapters, Motorsport-tech.com sells a pair of custom made 2-piece 4x100-to-5x127 adapters for $180. Adapters can be as thin as 35mm and up. High quality adapters.

have a Bergcup wheelset for way under 3 grand

[Esteban]

bump

[Esteban]

bump

[Esteban]

took some pics of the centers. Will post more pictures of the barrels later on.

[evilstar]

bump for sick wheels and a local. i want to check these out in person just so i can say i did. lol glws. wish i had the case id use them as tables.

[onizoku]

sent you a pm!

[Esteban]

sent you a pm!

replied

bump for sick wheels and a local. i want to check these out in person just so i can say i did. lol glws. wish i had the case id use them as tables.

haha

if you are looking for some magnesium race wheel furniture then I have a rare single BBS E62 centerlock wheel. It's 13x7 and I was going to make a clock out of it but have way too many projects. Nothing wrong with it and I have the bolts too.

Also have a very rare single 17x9.5 +19 SSR Bangvec II 5x120, legit 3-piece. Good for table stand or good for that nice looking spare for stanced E34 or ?.

$99 each SPECIAL

[MikeyRa]

Can the faces on the fronts and rears be drilled to 5x112? If so...

[Esteban]

bump up

be cool like Adam Corola

Can the faces on the fronts and rears be drilled to 5x112? If so...

I really doubt it unless the drilling is very minimal and eccentric steel plugs are used. Better off using adapters since Magnesium is softer

[Stephen]

Shipping to 98020?

pls

[Esteban]

Shipping to 98020?

pls

the centers are sold sorry