FT: Hayashi (HRE) 505s.

[FSUjbp]

These are for trade only. If some time passes and they aren't traded, then POSSIBLY they will be for sale. I'm looking for AC Schnitzer type 1 racing or BBS RS302. Your wheels can be in need of refinishing. I'm not interested in anything else, at all.

I have parts to make FOUR WHEELS. I have four centercaps, hardware, and three center nuts. I can make the following pairs of wheels:

16x7 ET25 (1 inch lip, five inch barrel)
16x8 ET14 (2 inch lip, five inch barrel)
16x9 ET0 (3 inch lip, five inch barrel)

The faces are 5x130 with factory steel inserts. For the 4x100 crowd, you can run these with 1 piece adapters which are cheaper.

These are the Japanese version. In my opinion, these are far more desirable than the US version because the faces are bigger. The US version has 12 inch faces. Japanese versions have 12.75 inch faces. Why does this matter? If you are looking to up-convert to 17s or 18s, bigger faces will look better. For reference, 16 inch BBS RS faces are 12.25 inches and 17 inch are 13 inches.

Two of the faces are at a machine shop being measured for custom one piece centercaps (which are not included at this time). Because of this, the wheels probably can't be shipped until around the first of July if we agree on a trade.

Pictures:

[softg]

price dag?

[FSUjbp]

price dag?

Read the post.

[softg]

Read the post.

I did dag, why not post a price, if you get what you want for them you can purchase said minimal selection. besides who doesn't like hard cashish?

[FABEL]

are these from Ric?

if you decide on a price & are willing to sell outright, please do contact me as I believe I am officially the 1st one to ask you this.

what condition are the lips?, are barrels bent or lip/barrel holes gouged at all? caps all there & in what condition would you say?

I'll end by saying: beautiful sheit you've got here! I say hold out on the sale & then contact Frame Bangin' FABEL.

thanks. thee end.

[FSUjbp]

are these from Ric?

what condition are the lips?, are barrels bent or lip/barrel holes gouged at all? caps all there & in what condition would you say?

Lips: I don't have first hand knowledge on the 2 inch as they are in transit. 1 inch are basically perfect but need to be polished. 3 inch: One lip has rash that is fairly significant. It is fixable and I can have it done.

Barrels: One barrel has a flat spot. It's the same one with the 3 inch lip with rash. Wheel repair should take care of both. All other barrels are filthy but straight with NO CRACKS and no evidence of previous crack repair.

Caps: Caps are as stated above. Four caps, three nuts. The caps seem to be steel. They need to be polished but are in good shape. The nuts are plastic. I was planning on repainting them but was going to do more research before attempting it.

The reason these issues aren't already addressed is because it would be pointless if a trade agreement is reached in which the buyer has no intention of using these parts. For example, someone that is looking to up-convert or someone who can' t use three inch lips. It would be a waste of time and money to fix those parts at this time.

[Eydreeyun]

Wanna trade the pair of 5 inch barrel? Reason is I have a set of 9.5 Epsilon mesh I'm trying to fit my e30, but I'd like the front to be 8.5" I measured the barrels to be 6.5" and lips to be 3" They are 20 bolts too.

[FSUjbp]

Wanna trade the pair of 5 inch barrel? Reason is I have a set of 9.5 Epsilon mesh I'm trying to fit my e30, but I'd like the front to be 8.5" I measured the barrels to be 6.5" and lips to be 3" They are 20 bolts too.

I don't know that they would fit. Do Epsilons have 12.75 inch faces? I have eight barrels so I might be open to it.

[Eydreeyun]

Ill measure the face and bolt gap tomorrow

[FSUjbp]

I did dag, why not post a price, if you get what you want for them you can purchase said minimal selection. besides who doesn't like hard cashish?

My reasoning, at present, is that unless I'm getting one of those two other wheels, I'd rather just keep these and step them up to 17s. I'm watching a set of ACS and a set of 302s. I may buy one and refinish these.

[Clay]

Good luck with sale man

If whoever buys/trades these needs more parts, I have (2) 2.5" lips, (2) 5.5" barrels, and (2) 6.5" barrels