Tweet
-----SOLD-----
I bought these wheels as 5x130 Porsche fitment ET38 mm, they were to go on a mk3 VW I'm putting together. I liked these as they are 15" centers with 16" barrels and step lips
Long story short the Seller can't correctly measure wheel PCD or offset. I found these to actually be 5x120 BMW fitment, with a lower offset. I measure an ET19 mm. Center bore looks to be 72.6mm Bimmer friendly (I honestly didn't measure as they bolted directly onto an E36)
Up for sale they go. I've tried to describe the condition of these wheels to the best of my ability. Please look at the pics, I purposely took pics in direct daylight to gain the best possible light and represent the wheels condition as truly as possible.
** Full disclosure: ONE wheel has had a crack in the barrel professionally repaired. Before and after pics of the repair have been included. Repair has been guaranteed to balance out.
Overall condition is quite good, Very very minimal rash for a set of experienced wheels. No bends on either lips or barrels, though some discoloration where wheel weights had been and near the valve stem bores. These look to have never been split and All center caps and center cap logos are present an accounted for. Wheel centers are in great shape paint wise, with few if any abberations present. Paint on the center waffles does have a slight difference in color temperature vs the centers themselves. All of the fully aluminum center-caps are present, one of them does have a bit of oxidation. Oxidation could easily be sanded out, if you were keen on doing a bit of a refurb.
Ive tried to be as actual about the condition of these wheels as possible. If you have any questions please don't hesitate to send me a PM. Additional/more detailed pictures are available upon request.
As it stands right now, I'm asking $900 shipped fed ex/insured/tracked professionally packed in the US OBO.
Onto the pics:
wheel thats been repaired
close ups of repair after:
barrel, before repair:
center caps:
backspace measurement:
width measurement:
center caps do not protrude past the lip when installed:
bimmer fitmentz:
I bought these wheels as 5x130 Porsche fitment ET38 mm, they were to go on a mk3 VW I'm putting together. I liked these as they are 15" centers with 16" barrels and step lips
Long story short the Seller can't correctly measure wheel PCD or offset. I found these to actually be 5x120 BMW fitment, with a lower offset. I measure an ET19 mm. Center bore looks to be 72.6mm Bimmer friendly (I honestly didn't measure as they bolted directly onto an E36)
Up for sale they go. I've tried to describe the condition of these wheels to the best of my ability. Please look at the pics, I purposely took pics in direct daylight to gain the best possible light and represent the wheels condition as truly as possible.
** Full disclosure: ONE wheel has had a crack in the barrel professionally repaired. Before and after pics of the repair have been included. Repair has been guaranteed to balance out.
Overall condition is quite good, Very very minimal rash for a set of experienced wheels. No bends on either lips or barrels, though some discoloration where wheel weights had been and near the valve stem bores. These look to have never been split and All center caps and center cap logos are present an accounted for. Wheel centers are in great shape paint wise, with few if any abberations present. Paint on the center waffles does have a slight difference in color temperature vs the centers themselves. All of the fully aluminum center-caps are present, one of them does have a bit of oxidation. Oxidation could easily be sanded out, if you were keen on doing a bit of a refurb.
Ive tried to be as actual about the condition of these wheels as possible. If you have any questions please don't hesitate to send me a PM. Additional/more detailed pictures are available upon request.
As it stands right now, I'm asking $900 shipped fed ex/insured/tracked professionally packed in the US OBO.
Onto the pics:
wheel thats been repaired
close ups of repair after:
barrel, before repair:
center caps:
backspace measurement:
width measurement:
center caps do not protrude past the lip when installed:
bimmer fitmentz:
Comment