FS: BBS RF-5000, 17x9,5 17x8.5 gold bolts,3inch lips,NJ

[nickyd]

TRADEDDDDDDDD U]PRICE DROP: 2500obo[/U]
specs
17x9.5 et+1 (fitment required, at least -3.9 degrees of camber, fender roll and slight pull, all done w out body work)
17x8.5 et +13 (no fender work required)
tires- 215/40/17 nankang ns20 50% balanced out

Location- 08234, NJ
contact- pm me here, or vivala3nicky@yahoo.com
price- $2500obo + shipping
condition- 9/10 (little scratches here and there on the faces,little chips on some of the bolts.)
Model- BBS RF 5000
6inch original bbs barrels -powder coated gloss white! zero cracks, zero bends, zero welds
BBS RF .5 inch- 5x120 (74.1mm center bore) et13
2x 2inch original bbs lips hand mirror polished.
2x 3inch aftermarket bbs lips mirroe polished
original bbs bolts- powder coated gold/flake
polished hex caps, OG black/gold bbs caps
* 74.1mm to 72.6mm aluminum center bore rings are included.

trades- not really looking for any unless -ccw lm20,lm5t or classics.
(car will be at h2o all weekend if anyone wants to check them out)


pics...
h2oi_2013_WHITBECK_011-1110x740 by vivala3nicky, on Flickr

h2oi_2013_WHITBECK_012-1110x740 by vivala3nicky, on Flickr


1376745_10153317786045531_1128351663_n by vivala3nicky, on Flickr

1374431_10153317790995531_1714581070_n by vivala3nicky, on Flickr


3I4A8241 by Primo-Lifestyle, on Flickr

bbs 5 by vivala3nicky, on Flickr

stancenation by vivala3nicky, on Flickr

bbs 1 by vivala3nicky, on Flickr

securedownload (1) by vivala3nicky, on Flickr

bbs 2 by vivala3nicky, on Flickr

[nickyd]

guys im sorry about the pics situation im not sure why flickr is a bitch right now i have a ton of pics that will be up tonight

[willis]

Wrong type of coding. Anyway, beautiful wheels and I want them.

[nickyd]

Wrong type of coding. Anyway, beautiful wheels and I want them.

Thanks buddy tonight when I get home I will repost them I'm not sure why it kept pasting the wrong one but I have a ton of pics while refinishing them and on the car as well

[nickyd]

if anyone wants to check them out the car will be in oc maryland tomorrow =]

[nickyd]

bump it

[yoshioka90]

are the rear offsets correct? 9.5 +1 seems awful aggressive and you seem to have fit them pretty easily with only just -3.9 camber.

[CandySucker]

are the rear offsets correct? 9.5 +1 seems awful aggressive and you seem to have fit them pretty easily with only just -3.9 camber.

to add the specs you posted for these wheels in this add and the specs you posted in your build are conflicting...

[nickyd]

are the rear offsets correct? 9.5 +1 seems awful aggressive and you seem to have fit them pretty easily with only just -3.9 camber.

yes my offsets are correct . wheels were 8.5 et13 all around i took off the rear 2inch lips and added 3inch lips for every .5 inch you minus 6mm of the offset. since the new lips are 1inch bigger= -12mm bringing the offset down to et1

[nickyd]

to add the specs you posted for these wheels in this add and the specs you posted in your build are conflicting...

the specs for my rfs in the build thread are the same exact as in this post, under my rfs is my apex arc8 specs make sure you werent looking at them lol

[nickyd]

are the rear offsets correct? 9.5 +1 seems awful aggressive and you seem to have fit them pretty easily with only just -3.9 camber.

first time i installed them started off w max camber of -7 but we placed the car on the alignment and got it down to -3.9/-4.2 camber in the rear to save some what tires and have it a bit more safer to drive. it was weird w so much camber under boost, also at -7 camber to zero out the toe i would of had to drill out the wholes on the toe adjustment plates and i did not want to do that

[nickyd]

pics are finally up!!!

[nickyd]

Bump it!

[nickyd]

hey there...

[Tommy604604]

Your car is my iPhone lock screen.



Carry on haha