18" bbs rf

[1badg35]

oh and unless someone wants to go a different route, they will likely be looking like a cooler larger version of these. hexes will be polished for the next level of detail, oh and these are 17" refurbs from last season not 18..

im open to ideas and willing to do whatever (to an extent), but I am feeling tiger drylac metallic gunmetal 2 stage powder at the moment

[1badg35]

The final widths will actually be 18x9.75 and 18x10.25 if I remember correctly (the .75 width and .25 width is because the german lip sizes typically are spun to the nearest 1/4" or 6mm not every 1/2" like here. So pretty close to what youre looking for. Once the parts come into my possession, I will take pictures of the accurate measurements.

I am going to be attempting to find an e46 m to test fit on, so these may be up your alley when complete. The initial sizes were for an e46m that I was planning on buying, but wound up passing on

[Icana4dit]

What are the final specs? I would buy them if they were 18x10 and 18x11

[1badg35]

decided i did not like the plastic hex caps, so i spent a little time to source a set of RS metal half height hexes. they will now be stripped and polished to match the new lips


lets keep the offers coming. these things would be perfect for an e46, a 1 series, even an e90 gen 3 series. I know as soon as the test fit pictures come out the set will instantly sell, but i would like to get a jump on the process here. I would rather not completely finish the set and then try to sell, although I completely would do that if need be and hold them till spring

[1badg35]

this set is moving along slowly, but i have made some changes and decisions.

centers can be any 5 lug bolt pattern desired (would need deposit to change them) currently 5x120 and will stay that way unless buyer needs something else

I did some tests with a center, and decided I was bored with the fully polished face. I decided that I think this set will be going for powdercoat.. at this point im thinking a metallic grey or a metallic bronze, but im open to suggestions from the person interested. I was glancing through swatches last weekend and have a few in mind.

decided to source some half height RS aluminum caps to swap parts over. RF come with plastic hex caps, and thats not good enough in my book. the metal caps are getting stripped and polished.. It is the little details here that will make this set.

bolts are in and choice is 24k gold plated or triple chromed. obviously dependant on center color

lips and barrels should be here shortly. stuck in shipping and i wound up adding parts to the custom order so it was delayed a bit

centers are going to possibly be face mounted. not quite sure yet, but i am considering it. all depends on what it looks like upon the test fit

[1badg35]

Yes that was just a temp test fit of the cap. The whole surface will be polished soon. Thats just a possibility, as I have been comtemplating a few powders that might set this off even more. Too many ideas, one set. Not entirely sure where this is going to go, which makes it fun.

[Beware]

Looking forward to these mock up pics! Will you be polishing the "webbed" part of the centre cap so it flows with the polished part of the spokes?

[1badg35]

partial update:
wheel halves are leaving germany wednesday so maybe next week i will have some pictures of a mocked up wheel.

[1badg35]

pics of the parts soon..

here is one of the faces which is the test dummy. entire face was hand polished, i had a few marks on the face which is why i decided to go back down to 600grit on the spokes. might keep the spokes brushed and hit it with a clear tint. should be one of a kind...

so far





336, like you i always have a few wheel projects in the works. currently in the works: this set, 3 sets of RS getting the 4x100 treatment, and a few rare things i will refrain from speaking of at the moment.

[336motorsports]

Id like to see what your building.

I have a set of 18" rfs in the cards myself that Ill be selling.

[1badg35]

decided to take this one a bit further. going to test out some tinted clears on the faces... Might turn into something interesting. Pics after this weekend of a test or two

this set may turn into something experimental in terms of the finish... unless the buyer really wants a fully polished set.

[1badg35]

they likely will.. ive seen more aggressive on 135s before. This set is aggressive, but not insane. Did it that way because I didnt have a specific car to put on, so i lightened it up a little in terms of the sizing.

[ballski00]

can't wait to see this.....wish these were gonna fit my 1er

[1badg35]

will get some pictures soon of the parts. obviously have to wait for pics of the lips and barrels until they are spun.

as of now, the set will have gold plated bolts, polished faces, and the hex caps will be a metallic grey of sorts. I am going to shoot it in a few colors to test out some ideas.

[nickzzzx]

glws, you do great work! Please post up pictures when this set is built, or being built