Tweet
Hello SW, it is time to officially try and part ways with my wheels. Winter is here so they are finally off the car and I will put a real effort into selling these. I ordered them straight from Work Wheels USA and waited a little under 3 months to get them.
Price: $3700 OBO NO TIRES NO LOW BALLS
Contact: (408) 722-6569
These are the only set ever made for the Subaru community.
18x10 +31 (R Disk, Clears all BBK)
-Matte Black Face
-Black Anodized Barrels
-Gold Rivets
Condition:
9/10 Condition, as you can see in the pictures 1 of the wheels has a very minor bit of rash about the size of the valve-stem cap. This happened during alignment when some retard ran it into something, not sure what. Sure as hell wasn't me though lol. There is also a little scratch inside where the lugs go, not sure how it happened but it looks reparable with the right buffer. Its not deep and doesn't appear to cut the metal at all.
Fitment:
These are perfect fitment for static 08+ WRX and very conservative fitment for 11+. These would also fit nicely on the GD platform with a little stretch and a tad bit more camber. On 11+ you could easily run a 255/35 tire or even a 265/35 tire. I ran a 245/35 tire and I am on bags and only had -1.4 degrees of camber in the rear at ride height.
Reason for selling:
In short, I get bored and like to change things up.
Notes:
These wheels get lots of attention. In my humble opinion for bags it would look better with 10mm more of offset however when I ordered these I planned on being static, hence the +31 offset to be good for daily driving. These would look killer on a GD with some camber, I really hope a GD owner buys them to be honest lol.
Thanks for shopping.
I took some pictures both in the sun and in shade to but pictures really don't do the black faces and barrels justice since its so damn hard to capture the true colors of the wheels. I feel the pictures in the share most accurately reflect the colors. The sun seem wayyyy to dark....
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr
Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr
Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
More pictures found here:
Work Meister S1 3P For Sale - a set on Flickr
Price: $3700 OBO NO TIRES NO LOW BALLS
Contact: (408) 722-6569
These are the only set ever made for the Subaru community.
18x10 +31 (R Disk, Clears all BBK)
-Matte Black Face
-Black Anodized Barrels
-Gold Rivets
Condition:
9/10 Condition, as you can see in the pictures 1 of the wheels has a very minor bit of rash about the size of the valve-stem cap. This happened during alignment when some retard ran it into something, not sure what. Sure as hell wasn't me though lol. There is also a little scratch inside where the lugs go, not sure how it happened but it looks reparable with the right buffer. Its not deep and doesn't appear to cut the metal at all.
Fitment:
These are perfect fitment for static 08+ WRX and very conservative fitment for 11+. These would also fit nicely on the GD platform with a little stretch and a tad bit more camber. On 11+ you could easily run a 255/35 tire or even a 265/35 tire. I ran a 245/35 tire and I am on bags and only had -1.4 degrees of camber in the rear at ride height.
Reason for selling:
In short, I get bored and like to change things up.
Notes:
These wheels get lots of attention. In my humble opinion for bags it would look better with 10mm more of offset however when I ordered these I planned on being static, hence the +31 offset to be good for daily driving. These would look killer on a GD with some camber, I really hope a GD owner buys them to be honest lol.
Thanks for shopping.
I took some pictures both in the sun and in shade to but pictures really don't do the black faces and barrels justice since its so damn hard to capture the true colors of the wheels. I feel the pictures in the share most accurately reflect the colors. The sun seem wayyyy to dark....
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr
Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr
Bagged Subaru WRX On Meister S1 | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
Work Meister S1 3P Matte Black Face Black Anodized Barrels and Gold Rivets | Flickr - Photo Sharing!, on Flickr
More pictures found here:
Work Meister S1 3P For Sale - a set on Flickr
Comment