Tweet
Post, PM me, or e-mail (removed) with any questions, offers, or for shipping quotes.
Willing to make deals for multiple items.
BMW E36 Air Lift (Easystreet) Universal Struts. 10 way adjustable. Includes leader lines with 1/4" PTC fittings. Left front has a rub mark from previous owner. The same strut had a couple dings in the shaft that are filled (pictured). Not sure what the story is there, as I got them used. Used for a total of around 7000 miles. Includes some extra miscelaneous parts. $550 SOLD
Universal Air Airhouse2 bags with 1/4 PTC fitting $50 each SOLD
Strange Engineering S6000EM shocks. 10 way adjustable. Slightly shorter than standard Z3/E30 shocks, and would be a very good match for lowered E36's. Mount sizes are the same as BMW, but the lower is narrower and includes a stack of washers to make up the difference. $100 SOLD
RidePro Manifold valves. Includes 1/4" PTC fittings. $150 each or $275/pair SOLD
E36 power top switches (4 available). Includes a plug and a short section of wiring. Used these to control the valves. $15 each
Viair 380C compressor. Two holes in the mounting feet are different, see pictures. Brand new filter installed, and comes with extras. $100 SOLD
Viair 1 gallon tanks. Both tanks were more than enough to raise the car. First one to sell will include the rubber grommets for the mounting holes. $25 each SOLD
SMC water trap $20 SOLD
SMC check valve $10 each SOLD
Leader line $15 SOLD
Tank gauge. Includes 1/8 to 1/4 bushing. $10 SOLD
~50ft air line with a silicone/fiberglass heat and abrasion resistant sleeve. $20 SOLD
30 miscelaneous fittings. Most PTC are Alkon. Current cost from Bagriders would be $124.50. $60 for all SOLD
3- 1/4 Tee
1- 1/4 PTC to 1/4 female
2- 1/4 PTC couplers
1- 1/8 Schraeder with 1/4 PTC fitting
1- 1/8 Schraeder with 1/4 bushing
1- 1/4 to 1/8 bushing
1- 1/4 175 psi safety valve
2- 1/4 male coupler
1- 1/4 female coupler
1- 1/4 PTC Tee
2- 1/4 PTC to 1/4 male angle
5- 1/4 plug
5- 1/4 PTC to 1/4 male straight
1- 1/8 PTC to 1/8 female
1- 1/4 PTC to 3/8 male angle
1- 1/2 to 3/8 bushing
1- 3/8 PTC to 3/8 male angle with 3/8 to 1/2 bushing
Willing to make deals for multiple items.
BMW E36 Air Lift (Easystreet) Universal Struts. 10 way adjustable. Includes leader lines with 1/4" PTC fittings. Left front has a rub mark from previous owner. The same strut had a couple dings in the shaft that are filled (pictured). Not sure what the story is there, as I got them used. Used for a total of around 7000 miles. Includes some extra miscelaneous parts. $550 SOLD
Universal Air Airhouse2 bags with 1/4 PTC fitting $50 each SOLD
Strange Engineering S6000EM shocks. 10 way adjustable. Slightly shorter than standard Z3/E30 shocks, and would be a very good match for lowered E36's. Mount sizes are the same as BMW, but the lower is narrower and includes a stack of washers to make up the difference. $100 SOLD
RidePro Manifold valves. Includes 1/4" PTC fittings. $150 each or $275/pair SOLD
E36 power top switches (4 available). Includes a plug and a short section of wiring. Used these to control the valves. $15 each
Viair 380C compressor. Two holes in the mounting feet are different, see pictures. Brand new filter installed, and comes with extras. $100 SOLD
Viair 1 gallon tanks. Both tanks were more than enough to raise the car. First one to sell will include the rubber grommets for the mounting holes. $25 each SOLD
SMC water trap $20 SOLD
SMC check valve $10 each SOLD
Leader line $15 SOLD
Tank gauge. Includes 1/8 to 1/4 bushing. $10 SOLD
~50ft air line with a silicone/fiberglass heat and abrasion resistant sleeve. $20 SOLD
30 miscelaneous fittings. Most PTC are Alkon. Current cost from Bagriders would be $124.50. $60 for all SOLD
3- 1/4 Tee
1- 1/4 PTC to 1/4 female
2- 1/4 PTC couplers
1- 1/8 Schraeder with 1/4 PTC fitting
1- 1/8 Schraeder with 1/4 bushing
1- 1/4 to 1/8 bushing
1- 1/4 175 psi safety valve
2- 1/4 male coupler
1- 1/4 female coupler
1- 1/4 PTC Tee
2- 1/4 PTC to 1/4 male angle
5- 1/4 plug
5- 1/4 PTC to 1/4 male straight
1- 1/8 PTC to 1/8 female
1- 1/4 PTC to 3/8 male angle
1- 1/2 to 3/8 bushing
1- 3/8 PTC to 3/8 male angle with 3/8 to 1/2 bushing
Comment