Tweet
Up for sale is everything off of my fully built 1.8t.
EVERYTHING has under 2,000 miles on it, most of it is even under 500 miles. I am selling the stuff for great discounted prices, you would save a ton of money buying these items from me than if you were to buy them new. Everything on this car is pretty much still brand new and barely used.
Also, if anyone wants the entire rolling body + interior I would be interested in getting rid of it pretty cheap. Engine bay is already shaved! interior is really nice terracotta and suede. All you would have to do is bolt a engine and ecu to it and you will have a really nice a4!
Electronics:
Haltech PS1000 Standalone ECU 1.8t package
Included with ECU:
-1.8t Wire Harness
-Haltech Boost Solenoid
-1.8t Big Turbo Tune for E85 by LJ at Full Blown Motorsports will get you to 450whp
-Custom Throttle Position Sensor
Over [s]$2,300[/s] invested, I am asking for $1,800
Racepak IQ3 [s]$755[/s] now $650
Boost:
Garrett GT3076r Dual Ball Bearing Turbo was [s]$1600[/s] now $1,000
-4" Ported Inlet
-3" Vband Exhaust
-T3 4bolt
Fuel:
Bosch 044 High Flow Drop In Fuel Pump fits many models [s]$425[/s] now $350
(No image, still in gas tank: http://www.034motorsport.com/oe-part...ons-p-383.html)
Bosch 1000cc EV14 Fuel Injectors [s]$450[/s] now $380
Block:
Clutchmasters 850 Super Single Bronze Ceramic [s]$1600[/s] now $1400
-Just purchased from Mike Hood
-Under 500 Miles
-Beautiful clutch, feels amazing.
-Barely even broken in yet.
ARP Main studs [s]$135[/s] now $80
Coated 034 Main Bearings [s]$130[/s] now $60
(600miles, still in the block, no image: http://www.034motorsport.com/engine-...ted-p-708.html
3 good scatt H beam rods survived [s]$350[/s] now $50 if anyone wants to try them.
(Still in block, no image http://www.034motorsport.com/engine-...cyl-p-806.html
3 good JE pistons survived JE 1.8T 20V Piston Set: 82.5MM Bore, 9.25:1 CR [s]$564[/s] $200
Single replacement piston from Mike Hood is available for under $200
Head:
Fully built AEB Head:
CAT 3658 Cams $950
Supertech Full Valvetrain kit + INCNL Exhaust Valves + Single Groove $975
New OEM Lifters $260
Supertech Guides $100
Port Polish /Machine Work and Install $900
Total was [s]3185[/s] now $2400
Cylinder #1 valves slightly kissed the piston. I have an invoice from Mike Hood for the 3 new valves. Total comes to $63. If you are interested in the head you can purchase it from me and do the valves yourself, or make a deposit and I will buy the valves and have my machine shop install them for you.
ARP Head Studs [s]$260[/s] now $150
Others:
-IPG Parts Pro Series Oil Catch Can -10AN Bungs Breather 179.99 now $120
-Random Assortment of braided line and fittings $150
I also Have the -10 ported + gold powder coated valve cover to go with the catch can. $50
And the AEB Intake Manifold powder coated gold $50
-Ecode headlights $200
Valeo, Drivers side has two broken tabs.
OEM 17" Wheels with 225/45/17's with great tread on them $350
Curt Hitch, receiver and ball $140
any further questions just shoot me a PM, I will respond daily. Thanks
EVERYTHING has under 2,000 miles on it, most of it is even under 500 miles. I am selling the stuff for great discounted prices, you would save a ton of money buying these items from me than if you were to buy them new. Everything on this car is pretty much still brand new and barely used.
Also, if anyone wants the entire rolling body + interior I would be interested in getting rid of it pretty cheap. Engine bay is already shaved! interior is really nice terracotta and suede. All you would have to do is bolt a engine and ecu to it and you will have a really nice a4!
Electronics:
Haltech PS1000 Standalone ECU 1.8t package
Included with ECU:
-1.8t Wire Harness
-Haltech Boost Solenoid
-1.8t Big Turbo Tune for E85 by LJ at Full Blown Motorsports will get you to 450whp
-Custom Throttle Position Sensor
Over [s]$2,300[/s] invested, I am asking for $1,800
Racepak IQ3 [s]$755[/s] now $650
Boost:
Garrett GT3076r Dual Ball Bearing Turbo was [s]$1600[/s] now $1,000
-4" Ported Inlet
-3" Vband Exhaust
-T3 4bolt
Fuel:
Bosch 044 High Flow Drop In Fuel Pump fits many models [s]$425[/s] now $350
(No image, still in gas tank: http://www.034motorsport.com/oe-part...ons-p-383.html)
Bosch 1000cc EV14 Fuel Injectors [s]$450[/s] now $380
Block:
Clutchmasters 850 Super Single Bronze Ceramic [s]$1600[/s] now $1400
-Just purchased from Mike Hood
-Under 500 Miles
-Beautiful clutch, feels amazing.
-Barely even broken in yet.
ARP Main studs [s]$135[/s] now $80
Coated 034 Main Bearings [s]$130[/s] now $60
(600miles, still in the block, no image: http://www.034motorsport.com/engine-...ted-p-708.html
3 good scatt H beam rods survived [s]$350[/s] now $50 if anyone wants to try them.
(Still in block, no image http://www.034motorsport.com/engine-...cyl-p-806.html
3 good JE pistons survived JE 1.8T 20V Piston Set: 82.5MM Bore, 9.25:1 CR [s]$564[/s] $200
Single replacement piston from Mike Hood is available for under $200
Head:
Fully built AEB Head:
CAT 3658 Cams $950
Supertech Full Valvetrain kit + INCNL Exhaust Valves + Single Groove $975
New OEM Lifters $260
Supertech Guides $100
Port Polish /Machine Work and Install $900
Total was [s]3185[/s] now $2400
Cylinder #1 valves slightly kissed the piston. I have an invoice from Mike Hood for the 3 new valves. Total comes to $63. If you are interested in the head you can purchase it from me and do the valves yourself, or make a deposit and I will buy the valves and have my machine shop install them for you.
ARP Head Studs [s]$260[/s] now $150
Others:
-IPG Parts Pro Series Oil Catch Can -10AN Bungs Breather 179.99 now $120
-Random Assortment of braided line and fittings $150
I also Have the -10 ported + gold powder coated valve cover to go with the catch can. $50
And the AEB Intake Manifold powder coated gold $50
-Ecode headlights $200
Valeo, Drivers side has two broken tabs.
OEM 17" Wheels with 225/45/17's with great tread on them $350
Curt Hitch, receiver and ball $140
any further questions just shoot me a PM, I will respond daily. Thanks
Comment