2001 GS430
Black on Black
The car was previously owned and built by a member of LIBERTY
Updates:
> Belts (75k miles)
> Battery (august 2013)
> Upper, lower ball joints, lower control arm 2 aka caster arm (in dec 2012)
> inner and outer tie rods, steering rack bushing (jan 2012)
> rear struts AND brand new bags (april 2012)
> Brakes-front (may 2012)
Modifications:
Exterior
One-off body kit - Front/Sides/Rear custom BMW 5 series bumpers (OEM materials used). Mounts perfectly using stock mounting holes. OEM and 5-series OEM molded.
Modified fenders/quarterpanels to be able to roll low w/ zero rubbing (fronts flattened/widened, rears tubbed/flattened/ widened) - Car built around wheel specs for paper thin tolerances so not to damage anything
Shaved trunk
Roof wing
Retrofitted headlights - e46 bixenon projectors in low beams, LS430 projectors in highbeam section w/ OEM bmw halos
Projector fogs
Turn signal mirrors w/ puddle lights
Mercedes Benz style blue tint (50%)
LED tails
Toyota Japan wind guards
Flip down/hideaway front license plate bracket to use when travelling out of state
Wheels
Luxury Abstract Admirors - 19x9f+5 and 19x10r+0 wrapped in 225/35 and 235/35 tires (both f/r nearly brand new) - 3pc Forged construction - Limited Edition finish
I just replaced the rears with Falken FK453s recently and they have less than 1,000 miles on them.
Suspension
Ksport Airtech coilover/airbags (built to ride LOW)
Full accuair E-level w/ touchpad, manifold, and remotes (car does not rub)
5 gallon air tank and AirZenith compressor
Top-Speed toe arms
Top-Speed thrust arms
Front lower H-brace
Daizen LCA#2 bushing
Daizen steering rack bushing
Interior
JP Curtains (black) Front and rear
Custom front door panels for 6.5" CDT components
LED lights in all locations
Audio
Fully fiberglassed/wrapped trunk to show off the goods (see below - although pic does not show the Air Zenith and Accuair Elevel components)
Alpine PDX series amps - 4.150, 1.600
Alpine 12" type r
CDT components (f/r) w/ custom Focal crossovers
Kenwood KOS-V500 headunit w/ overlay on OEM NAV screen using Nav-TV.
Kenwood CD Changer
Kinetik HC1800 Battery
Engine
SRT intake w/ performance chip
Engine covers painted black (professionally)
Resonators removed
Turn-downs after mufflers installed so there is no exhaust cutouts in bumper
I just bought a Dodge Viper and I'm pricing this to sell asap.
Mileage = 92,000
Car is located in Central New Jersey
PRICE: $19,500
Email me if you're interested bmabutas29@aol.com or 732-921-4547
Black on Black
The car was previously owned and built by a member of LIBERTY
Updates:
> Belts (75k miles)
> Battery (august 2013)
> Upper, lower ball joints, lower control arm 2 aka caster arm (in dec 2012)
> inner and outer tie rods, steering rack bushing (jan 2012)
> rear struts AND brand new bags (april 2012)
> Brakes-front (may 2012)
Modifications:
Exterior
One-off body kit - Front/Sides/Rear custom BMW 5 series bumpers (OEM materials used). Mounts perfectly using stock mounting holes. OEM and 5-series OEM molded.
Modified fenders/quarterpanels to be able to roll low w/ zero rubbing (fronts flattened/widened, rears tubbed/flattened/ widened) - Car built around wheel specs for paper thin tolerances so not to damage anything
Shaved trunk
Roof wing
Retrofitted headlights - e46 bixenon projectors in low beams, LS430 projectors in highbeam section w/ OEM bmw halos
Projector fogs
Turn signal mirrors w/ puddle lights
Mercedes Benz style blue tint (50%)
LED tails
Toyota Japan wind guards
Flip down/hideaway front license plate bracket to use when travelling out of state
Wheels
Luxury Abstract Admirors - 19x9f+5 and 19x10r+0 wrapped in 225/35 and 235/35 tires (both f/r nearly brand new) - 3pc Forged construction - Limited Edition finish
I just replaced the rears with Falken FK453s recently and they have less than 1,000 miles on them.
Suspension
Ksport Airtech coilover/airbags (built to ride LOW)
Full accuair E-level w/ touchpad, manifold, and remotes (car does not rub)
5 gallon air tank and AirZenith compressor
Top-Speed toe arms
Top-Speed thrust arms
Front lower H-brace
Daizen LCA#2 bushing
Daizen steering rack bushing
Interior
JP Curtains (black) Front and rear
Custom front door panels for 6.5" CDT components
LED lights in all locations
Audio
Fully fiberglassed/wrapped trunk to show off the goods (see below - although pic does not show the Air Zenith and Accuair Elevel components)
Alpine PDX series amps - 4.150, 1.600
Alpine 12" type r
CDT components (f/r) w/ custom Focal crossovers
Kenwood KOS-V500 headunit w/ overlay on OEM NAV screen using Nav-TV.
Kenwood CD Changer
Kinetik HC1800 Battery
Engine
SRT intake w/ performance chip
Engine covers painted black (professionally)
Resonators removed
Turn-downs after mufflers installed so there is no exhaust cutouts in bumper
I just bought a Dodge Viper and I'm pricing this to sell asap.
Mileage = 92,000
Car is located in Central New Jersey
PRICE: $19,500
Email me if you're interested bmabutas29@aol.com or 732-921-4547
Comment