E36 rear camber, want more! need help!

[ninety4e36]

yeah and if anything just roll/pull the fenders.

[pumpin_fistsE36]

yeah and if anything just roll/pull the fenders.

well i already cut my fenders so they are paper thin, i really dont want to pull them lol

[dfreshx00]

get a friend who works somewhere where you can get to an alignment rack. the stock rear control arms, with coilovers, can get to near 3.5-4*. ask me how i know.

[pumpin_fistsE36]

i figured out how to get more camber i have camber arms but havent put them in yet but i figured out the centric bolt gives more neg camber

[MrFukengruven]

yeah im running 18x8.5 et15
no adjustable rear control arms

FTW! I have no adj. rear control arms either. I run 17" x 9.0" Kinesis K57's in the back with an ET26 in the back. Camber was measured on a few occasions. My stock RCA's have held up to more than -3.5 in the back with daily driving and track events

[da_joint]

FTW! I have no adj. rear control arms either. I run 17" x 9.0" Kinesis K57's in the back with an ET26 in the back. Camber was measured on a few occasions. My stock RCA's have held up to more than -3.5 in the back with daily driving and track events

got any pic's?i'm curious how the they look with -3,5 camber

[RIcKO]

how much costs the camber arms ?

[pumpin_fistsE36]

how much costs the camber arms ?

they typically run from $150 to $250 depending on the brand, install is a nightmare though...

[pumpin_fistsE36]

got any pic's?i'm curious how the they look with -3,5 camber

im running 17x10 et0 BBS style 5's right now with slight fender pull/shave with stock control arms and -4deg camber

[Aphrodizeac]

Interesting.. I'm on 17x8.5 ET13's with no adjustable control arms either, no spacers, and I have about -3 degrees all around.