Announcement

Collapse
No announcement yet.

Coilover Ride Height Help.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Coilover Ride Height Help.

    So I have a pair of CX Racing coilovers on my 2011 Ford Fiesta. I maxed the tears and took the collars off. The front I got them as low as I could go. We measured the coilover itself and both coilovers are at the exact same settings. BUT, after I let the springs resettle for about 5 days, the wheel gap on my passenger side is still about an inch higher than the drivers side. I believe we achieved the maximum amount of low the springs will allow us, so I feel like my only option is to remove a collar or two from the passenger side. Any suggestions? New to all of this, so advice would really help.
    2011 Ford Fiesta
    Instagram: @chase__lawler

  • #2
    Suggestion: go pick up your biggest buddy and go for a long cruise with them riding shotgun. I know; not the most technologically advanced answer, but maybe just putting some weight up front on the passenger side will help that spring settle in a little lower.

    Comment

    Working...
    X