Custom spring help Function Form type 1's

[rfensty245]

Hello everyone, Im looking to get some swift springs for my funtion form type 1's for my 04 tsx. Now I spoke with ff and got the stock spring info from their type1's but now this is where I need your help.

I want to be able to go lower, and have a stiffer ride so the stock type1 specs are as follows
Front:
Length- 200mm
Diameter- 2.5''
Spring Rate-12k

Rear:
Length- 220mm
Diameter- 2.5''
Spring Rate- 6k

So I was thinking of ordering 180mm length for the front and 200mm for the rear.
Same diameter, but changing the spring rates to 14k or16k front and 10k or 12k rear since the rears are super soft. I really appriciate any and all help.

[CRG Racer24]

I didn't calculate the difference with the amount the springs will compress, in comparison to each other, but strictly speaking of drop in regards to spring length, you're looking at .8" drop all around.

In simpler terms:

Front drop w/new springs = .8" drop
Rear drop w/new springs = .8" drop

[rfensty245]

That would be perfect then. Thank you for your help!

[JP Patches]

Where did you order the springs from?