How to go lower on KW V1's E90 335i?

[Schmaudi]

Hey guys, I recently switched flavors from Audi to BMW. Haven't been on here much lately, too busy and too many forums.

I come to you with a question of how to get low. I'm pretty low right now but I'm running 19's and I really want to step down to 18's but I am afraid that I will not be happy with how I am sitting with the smaller wheels.

Here's a shot of my rears. They are cranked all the way down. The fronts wont be a problem.





Any ideas guys?? TIA

-Chase

[Dibaltic]

remove the perch

[AllGo'N'Show]

KW's aren't meant to be slammed, they drive/ride/perform way better at recommended settings, plus your warranty is toast if you run them below the recommended settings.

[Jesus Christ]

KW's aren't meant to be slammed, they drive/ride/perform way better at recommended settings

This is true, KW does not design these with slamming the car in mind.

Your only solution without buying new coils is getting a shorter spring which i can help you out with. I have any sized swift spring in stock, let me know if i can help you out.

[Masonbarnard]

This is true, KW does not design these with slamming the car in mind.

Your only solution without buying new coils is getting a shorter spring which i can help you out with. I have any sized swift spring in stock, let me know if i can help you out.

which springs do i need to go lower in the rear on my ground controlls?

[Schmaudi]

This is true, KW does not design these with slamming the car in mind.

Your only solution without buying new coils is getting a shorter spring which i can help you out with. I have any sized swift spring in stock, let me know if i can help you out.

Thanks man. I'll let you know when it comes time to get new wheels hopefully about a month or so.

[Schultz28]

which springs do i need to go lower in the rear on my ground controlls?

you could probably get shorter springs from swift, hyperco, or vogtland racing springs.

[AllGo'N'Show]

KW sells springs too so you can change spring rate and if you have a good enough sales/tech guy he can find them shorter for you.

[Dibaltic]

you could probably get shorter springs from swift, hyperco, or vogtland racing springs.

i've gotten a couple sets of springs from hyperco. they've been good to me each time. they just dont have as wide of a variety as swift. but you can normally find hyperco's and make them work since they are normally pretty close anyways