car is a 99 v70r. i did a DIY coilover on the front.
components are
Koni Dampers
Afco Coilover springs
Afco Adjusters
QA1 9" 350lb Coilover spring
and all new mounts and bearings for the top.
well i installed the coilovers, turned the konis up pretty much all the way, backed them off about 1/8 turn.
when i am riding on good streets the car is fine, however when i hit a bump it is nasty. it sounds like the shock is bottoming out, now my old bumpstops crumbled and i didn't reuse them. i am ordering some today.
the spring is only about 5 threads up from the bottom, thats where the adjustor is. am i missing something.
i feel so lost, but basically my car feels like its coming apart when i hit a bump
components are
Koni Dampers
Afco Coilover springs
Afco Adjusters
QA1 9" 350lb Coilover spring
and all new mounts and bearings for the top.
well i installed the coilovers, turned the konis up pretty much all the way, backed them off about 1/8 turn.
when i am riding on good streets the car is fine, however when i hit a bump it is nasty. it sounds like the shock is bottoming out, now my old bumpstops crumbled and i didn't reuse them. i am ordering some today.
the spring is only about 5 threads up from the bottom, thats where the adjustor is. am i missing something.
i feel so lost, but basically my car feels like its coming apart when i hit a bump
Comment