75561 Universal Macpherson Setup

[Oh Damn, it's Sam]

Apologies, I mis-typed above. If the car is feeling bouncy, *increase* the damping on the struts.

The bags should swivel with the steering. This is why Air Lift includes those nice braided leader hoses, because they'll tolerate being moved around as the bag rotates.

[svcglobal]

Ok Sam, increased to 7 in the scale of 9 and will try today commuting.

Some pictures of the second welding using TIG and ss rod weld.

Just to be safe, I protected the factory welding with a steel band. The damping knob was installed later...

[svcglobal]

In the mean time (welding & preparing the rear bag SS-5 supports) can I enable the Accuair learning mode only with the two front finalized struts?

[Oh Damn, it's Sam]

Nope. E-Level is going to want all four bags and all four sensors installed, otherwise it'll throw an error code and drop out of height management mode.

[svcglobal]

Air Lift suspension with Accuair Rocker Switch plus I-Level (https://youtu.be/ZtKclWwYGs0)

[Oh Damn, it's Sam]

Hell. Yes.

Also, that compressor is LOUD

[svcglobal]

YouTube link: https://youtu.be/ZtKclWwYGs0 (less shaky)

It is loud since it is under the car... Loud outside, very quiet inside.

[svcglobal]

Got one height sensor mechanically disconnected (loose the nut).
The error was having only the green LED of the rocker switch blinking even at ride level selected (should be steady).
Took half hour to understand what were happening...
Should be something wrote down at the instructions about that behavior.