Announcement

Collapse
No announcement yet.

No lift at 120+psi

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • No lift at 120+psi

    So I have a 05 tsx. I bought Air Force air struts and had them installed. I got the rears to work perfectly with no problems at all. When I went to air up the front it didn't lift at all even at 120 psi. So what I did was I jacked up the car and while it was in the air I aired it up and then lowered the car. I had huge amount of lift. So it seems like the car needs help getting a head start lifting the car. What do I do ?

  • #2
    You'll need to run a higher pressure cutoff for your tank. I am assuming that right now you have a 150psi cutoff. What management are you running? This is pretty typical with sleeve style struts since they roll differently than other style bags. I would go with a 200psi cutoff if possible.

    - www.bagriders.com - Email us at: sales@bagriders.com -

    - Did you find a lower price? We Price Match! -

    Comment

    Working...
    X