fitting porker wheels on a bmw

[imola]

hi

got a mate who wants to fit some onto his e36

the porker wheels are 130 stud diameter, whats needed to make these fit

[imola]

bump

[TheNeek]

adapters I would guess. Are they 5x130?

[Tuck&Poke]

would need to know width and offset to figure out if adapters are even possible

[hinrichs]

or a redrill

[imola]

5x130 we are just seeing if its possible then we will look at the sizes

what size are the adapters

[hinrichs]

anything above 15mm would can be made, 20mm is the usual size used even when going custom

[imola]

the wheels we have seen are

8x18 et52 front and 9.5x18 et47 rear

[Dr.AK]

30-35mm Adapters in the front and 20-25mm adapters in the rear and you'll be fine and have a nice fit.

Adapters are possible, there was a guy on here who ran a set of 911 wheels on his E36 sedan using custom adapters, IIRC.

[imola]

thanks for the info, food for thought