sawblades help.

[pfhunt44]

I am stuck in the middle of what I should do. I have stripped the clear coat and then buffed the faces with mother's mag/alum polish. But I would like to know if I should sand and polish the lips or just buff them with a powerball? But as you can see in the pictures there are rock chips and stuff.

1.

2.

3.

4.

side views
1.

2.

3.

4.

what should i do about these, I am talking about the spider webbing

[mpv]

the lips and centers are clear coated so in order to get rid of the spider webbing and get the lips to a " polished" finish you are going to have to strip the clear and then start polishing no depending on what you are trying to do you can use sand paper if you are just trying to do the lips but if you are doing the centers as well I would use a chemical striper to remove the finish from the wheels

[pfhunt44]

the lips and centers are clear coated so in order to get rid of the spider webbing and get the lips to a " polished" finish you are going to have to strip the clear and then start polishing no depending on what you are trying to do you can use sand paper if you are just trying to do the lips but if you are doing the centers as well I would use a chemical striper to remove the finish from the wheels

i have already removed the clearcoat. but i was wondering what would look better the polished lips or keep the machine finished lips?

[mad325is]

polished

[cozilla]

Yea man polish those lips!!!