wheel help.....

[Mr. DC2 Man]

Just asking for opinions, how will raderwerks stp-1, 16x9 +15 look on an integra?
I'm looking for something with that mesh, webbed look.
Integra is dumped, sitting on rota gt-3's right now. Just asking for opinions. Thanks

[Kielan]

Look up the Phaze2 Integra that will be all you need to make your decision hahaha. DO IT!

[chev_chelios]

i've seen some integras with decent stance and all i can say is that it's like every other car; there is a way where it's pulled off correctly and the wrong way.

what et and wheel size are you running now? knowing this will help me give you an answer.

[Mr. DC2 Man]

Right now i am running 16x7 +40 f&r

[Mr. DC2 Man]

I'm basically going for the "hellaflush" look, i just dont want the tires to be sticking out, like a mexiflush, i know im going to have to roll the fenders a shitload and have some camber in the rear.

[*96tegls*]

16x9 will look great man !

i'm building a set of 16x8.5 16x9 for my 96 integra

i just wouldn't suggest going with a 9' all around unless your car is high off the ground !

[SeeClass]

Just look for the price....dz exclusiv, miro, raderwerks, all sell the same wheel with a different center logo....they come from the same manufacturer in taiwan..

[Mr. DC2 Man]

16x9 will look great man !

i'm building a set of 16x8.5 16x9 for my 96 integra

i just wouldn't suggest going with a 9' all around unless your car is high off the ground !

My car is not high off the ground....pretty dumped, would there be any problems with going 16x9 all around?

[Mr. DC2 Man]

Anybody, i'm just looking for some help, lots of help.

[firelizard]

Just do it.

Obviously you're going to have fender clearance issues, so you'll have to pull them, run stretched tires, and lots of camber.

There are plenty of similar cars with similar wheel specs.

[Tuck&Poke]

rimtuck.com has some good integra examples