Tweet
Hello, new to the forum buy I have a quick question. I just purchased epsilon sw 15x7 with a 4x110 pattern. I have 1 inch adapters to run them on a miata. Question is I am unsure of the offset and if the fitment will be appealing. The back of the says -jjx10. What tires will look the best? 165/45r15 or 195/50r15. Any help would be great.
-
-
What is the offset with and without the adapters?
Measure the backspace and overall width if you do not have the offset. -
So I did some measuring, back space and the other to calculate the offset. I am seeing -12 offset which seem ls a lil crazy for a miata?? Any ideas here. From the hub to the lip I measures 85.73mm and from the ground to the lip I measured 203.3mm. 203.2/2 then subtracted from my ground to hub measurement have me 12.87 but since my second number is lower than my first I know it's negative correct? Any help would be great. I can't mock the wheels up and before i buy tires I would like to know the rims will work. ThanksComment
-
I didn't take into the width of the,inner rim. I believe it should be roughly +0, what is,the exact procedure to accounting in the rim width with the total offset and backspacing measurementsComment
-
Even a -12 15x7 should be doable on a Miata.Comment
Comment