Need help to find wheels for mye ride - Volvo 945

[B230FK]

Hello,

I really need help to find some cool wheels for my Volvo 945, and I thought why not ask here For those who doesn't know, the bolt pattern is 5x108 ET20. I really love deep dish wheels and concave style. It doens't matter if the wheels isn't 5x108 as I can get them re-drilled.

Here is a picture of my car if it helps finding wheels.


Thanks
-E.Winjum

[5SpeedEJ6]

Your first step is to figure out what size wheels you want, and then what tire size you want (also whether you want stretched tires or not). Anytime I want to buy new wheels I use tyrestretch.com and willtheyfit.com to calculate offset, width, and tire stretch size. Once you figure out the size you are looking for, I'd start looking on eBay (for cheaper price), or you could shop CCW's, WCI's, which are much more expensive wheels.

[B230FK]

Original Offset is 20, the wheels I have there are ET13. So I am thinking of getting somewhere around ET0 and ET30. And tire size depends on the width of the wheel, but somewhere around 215/35-18 or 225/35-18.

I have checked ebay alot, but with my bolt pattern it ain't that much to chose, so I might need to get from other bolt pattern and bore new holes. But I was thinking more about if anyone knew som cool wheels that I might not seen before that could fit

[OrangeBlue]

You could look into 5x110 pcd and run wooble bolts.., and three piece rims with 5x110 are
usually pretty cheap too...

Maybe you seen them:

http://www.stanceworks.com/forums/showthread.php?t=81256

Or look here: http://www.stanceworks.com/forums/forumdisplay.php?f=96

[supremeKEN94]

could run adaptors to fit different lug pattern, I had the same issue and decided to BMW lug pattern on my S60. if you choose to stick with 5x108 they share the same with Jaguar, Land Rover, Ford, and some Ferrari's! gotti is a very rare set of wheels that commonly are in 5x108, would look sick as well! good luck!


IG: keepcalmitsken

[Chris@fifteen52]

We have some of our cast wheels available in 5x108 and have blank wheels to be able to do custom specs.

[SeeClass]

I've inserted a bunch of wheels to the 5x108 bolt pattern. You can typically move 7mm any direction. You can use 5x112 wheels and drill them to 5x108. Your best bet is to look for 17x9 5x114.3 wheels to insert to 5x108.