Rebuilding SSR Agle Premiums

[Creation]

I have heard bad things about cz wheels. And wheelflip.

Memoryfab, or vr wheels seems to have its shit together

Thanks for the input! I'll check them out.

[Icana4dit]

I spoke to CZ wheels, and they said the lips wouldn't be a problem. I found out the barrels and lips are 2pc welded, so they'll have to be machined then installed the new lips.

Thanks for the help Zoo!

I have heard bad things about cz wheels. And wheelflip.

Memoryfab, or vr wheels seems to have its shit together

[Creation]

I spoke to CZ wheels, and they said the lips wouldn't be a problem. I found out the barrels and lips are 2pc welded, so they'll have to be machined then installed the new lips.

Thanks for the help Zoo!

[zoo]

The Rim I.D. @ Bolt Flange is not bolt hole to bolt hole. It is the inner diameter taken at the flange area.

[Creation]

The current lips do have a step. But even that those are similar, they wouldn't fit. There's an inch difference in my bolt flange alone.

Noticed something.
The lips I have are reverse, so the face is huge.
Triangle step lips have similar dimensions to what you posted:
Rim I.D. @ Bolt Flange: 17.500" / Bore: 15.900"

[zoo]

Noticed something.
The lips I have are reverse, so the face is huge.
Triangle step lips have similar dimensions to what you posted:
Rim I.D. @ Bolt Flange: 17.500" / Bore: 15.900"

[Creation]

Well dang, so if triangles are a no-go will I need to source OEM lips?

[zoo]

The 19" Triangle lips I have measure ~17.4 bolt hole to bolt hole. Bore is 16.9"
So no go there.

[Creation]

Any help would be greatly appreciated

[Creation]

Bump!

[Creation]

16 1/2" from center of bolt hole to center of bolt hole.

Just for reference, my lip measured at 3.5" in the rear from where the lip starts to the lip/barrel meeting spot.

Only 2.5 is actually visible.

[Creation]

I'll try to grab a measurement in the morning!

[zoo]

Across, not side by side.

[Creation]

The wheels are currently on the Jeep, for the bolt hole to bolt hole do you mean across the lip? or the hole to hole side by side?

[zoo]

Measure your lips, bolt hole center to bolt hole center. Also, if you have the center out, measure the inner diameter.