what do i need for 94 integra

[bigmike]

i wanna get the whole flush look with my fenders rolled but dont know what offset i would need... i wanna do mild stretch also... sorry for the noob question!

[Zic]

A measurement from your wheel, to the fender.
A fender roller, to roll your fenders.
The size of your wheel.
The offset of your wheel.

And know what size of the new wheels are gonna be.

Then play with this.
Click.

[Zic]

Lets say.

There is 4cm, to your wheel to be flush with the fender.
And the current size of your wheels are 6x15'' et 40. with some 185/55-15 tires.
And you wanna run some 8.5x17'' But you don't know what offset or tire to go with.

First off, you put all the info in the link that i posted.
A mild stretch on a 8.5 would be 205/40 or 215/40 depending on the brand of tire.

Then you just put in a random offset, on the new setup. and look at what poke says there.
With this one, the old poke says "36.2mm" But you wanted the new wheel to sit 40mm more out.
So the new poke would ideally be 76.2mm.

I played around a little, and found an offset of 32mm, would be where we wanted it to be in this case.


Hope you understand.

[EMU]

i say around 16x8 +25 would be flush!

this is a 16x8 +20

[NikonJonWtf]

In for this thread, I have a teggy also and would like to see how this turns out!

[EMU]

heres a 16x8 +0 with camber kits in front and runiing 205/40-16 tires

[EMU]

i do have coils for u integra guys and wheel sales just check us out on the vendors

[NikonJonWtf]

That fitment looks nice, I wouldn't choose sportmaxx though very played out now.
But for the price you can't beat em.

[NikonJonWtf]

i do have coils for u integra guys and wheel sales just check us out on the vendors

I'm in need of coilovers...Noob over here having a hard time locating what you're talking about?
What brands do you sell?

[Kielan]

In for coilover info for my teg.

[DRAGINMYE46]

dude it sounds like you are very new to the game.. lol.. i would first get a set of coilovers any kind will do.. just make sure you spend some money on struts.. i had no-name coil overs on a set of skunk2 struts and skunk2 camber kits... i also had 15x8 +0 offset with 195/50/15 on a civic wagon.. they poked hella but i like that look.. if you want to be on the safe side.. run something in the +20 to +25 range and 195/45 to 195/50 range.. hope that helps...

[Kielan]

I know what wheels I am getting the OP doesn't but I just wanna see what other options I have other than GC coilover sleeves.

[bigmike]

Im very new to the game ! Lol please excuse me as i may sound like a dumbass. I'm probably loooking to get the rota slipstreams, and the website is useful but i dont know the whole fitmode code guide shit, i get lose when talking abot 16x8 5.734 2332 lol

[Kielan]

16x8 et35 means 16 inch wheel diameter, 8 inches wide, and +35 offset. It took me a bit to figure it all out but once you do its really easy, and you will become a wheel whore there is no way around it haha.

[kevinm1981]

i say around 16x8 +25 would be flush!

this is a 16x8 +20

is that with or without camber kits?