Official "Fitment" Thread

[Titty]

Those wheels look extra tiny on that car.

[AnchorsAweigh]

+2 for undersized. I'd rather be low than be able to say I have big wheels.

F/R 17x9 +22 wrapped in 205/40R17 Falkens (old setup)

Agreed, went from Bentley Mulliners (19x9) to bentley GTCs (19x9) to Alphards 18x8.5/9.5 to my Aero 1s (17x8.5/9.5)

I think it's better to lay frame and poke lip then tuck and lay frame

[[666]]

Mine isn't so crazy but hopefully get more people into undersized wheels

17x9 -7 205/50/17 s.drive @ ~-3.5 17x10.5 +0 225/50/17 s.drive @ ~-4.5

+2 for undersized. I'd rather be low than be able to say I have big wheels.

F/R 17x9 +22 wrapped in 205/40R17 Falkens (old setup)

[Schmiesus]

Wheels: 19x9.5 +32mm Front +27mm Rear

Tire: 225/35R19

Bodywork: needs to be redone

Camber: Front: Stock
Rear: -3

[244Brick]

WOW Shaun!

[Shaun708]

Official "Fitment" Thread

Wheels: 18x9.5 +15 rear +25 front

Tires: 205/40

Body work: roll/slight pull

Camber: -1.7 rear -.4 front

[cobrawannabe]

Here's another up for undersized wheels.

OZ/Fittipaldi Monolithic
16x7.5 et20 all around
205/40-16
-1.8* camber front
-2.5* camber rear

[h3llk1t3]

Mine isn't so crazy but hopefully get more people into undersized wheels

17x9 -7 205/50/17 s.drive @ ~-3.5 17x10.5 +0 225/50/17 s.drive @ ~-4.5
[/IMG]

+1 for undersized, love how you make them tire sizes work as well. Yokohamas are beautiful.

[flat4wagon]

Let's get a little Subaru love in here.

Subaru WRX wagon
18x9.5 +38 BRota MXR
235/35/18 tires
3mm spacers in the rear to get a little extra clearance
Roll and moderate pull all around
-2.5* front, -2.9* rear camber






As soon as the weather turns, I'll have an update on my new set-up for this year. 17x9 +30 fifteen52 Tarmacs with 205/50 tires. I'm going to drop it another 1/2" or so, but I'm not sure what kind of camber I'll be running to get them tucked in there.

[siopaolover]

This thread is awesome.

Here's all I have... 18x8.5 et35 all around, fronts have 15mm spacers and rears have 25mm

Fronts and rears were hammered for clearance, but fronts were friendlier.


DSC_0136 by fbaladad, on Flickr

DTSJ by fbaladad, on Flickr

[SleepyRN]

^ Same on the G35's on 18's... 17's are unheard of other than winter setups. On our forums there is only like a 10 page thread on G's with 18's. 19's and 20's rule the place. I almost kept my BBS 17's, but then decided against it.... just can't get low enough to fill the gap.

The 350Z is a little more prone to 18's.

[Blumagic]

Local guy just bought 20's for his...

It is low however and heavily boosted... but 20's?

Genesis community is a bit different LOL.

I think it is partially a marketing thing. I rarely see any marketing for anything under 19" on genesis forums.

Plus I got told 17" would look bad by Genesis owners i knew when i said i was going to run em, shiiiiit tho most of the time you get that response if you even say 18" on the forums.

I'm sure there was more who didn't say anything to me directly. But a lot of individuals get those opinions and get all scared off

[aLaFleur]

Mine isn't so crazy but hopefully get more people into undersized wheels

Local guy just bought 20's for his...

It is low however and heavily boosted... but 20's?

[Blumagic]

Mine isn't so crazy but hopefully get more people into undersized wheels

17x9 -7 205/50/17 s.drive @ ~-3.5 17x10.5 +0 225/50/17 s.drive @ ~-4.5

subtle roll&pull

Fitment shots:





Side View (to show they fill the wheel wells nicely):

[SleepyRN]

I will be!

http://www.stanceworks.com/forums/showthread.php?t=56916