E24 Fitment

[molly_watah]

I'm looking to pick up a square setup of 16x9.5 wheels. They're ET38, and I'm trying to figure out if the setup will fit. The car will be running ground control coils, and I would probably pick up either a 30 or 35mm spacer to get them flush.

I know Mike Borroughs' 6er had something like 10.5 out back with -10 offset, but I just want to be sure that they fit before I pick them up.

[molly_watah]

anybody have any idea?

[kpg2713]

Vette wheels? Should work with the proper spacer. Get the wheels first, and measure out how much spacer you need to fit to the fender as you like. If you search, there is one guy who ran 25mm spacers with some salad shooters.

[molly_watah]

Vette wheels? Should work with the proper spacer. Get the wheels first, and measure out how much spacer you need to fit to the fender as you like. If you search, there is one guy who ran 25mm spacers with some salad shooters.

Not Vette wheels actually they're some 80's era Meshie BBS not sure what care they're off of. I've done some math and it'll definitely work. Just deciding if I want 16's or 17's

[VanDamage]

You'll need spacers to clear the strut assemblies on the inside of the rim. My wheels are 16x8.5 ET12 and they just barely clear the front struts.