++**"Help me identify this wheel!" Thread.**++

[zoo]

Aren't E16 faces much smaller?

With the "custom" information from BBS, and the fact the only 2 sets known were on SEMA cars, they're probably truly custom. How confident are you they're magnesium and not aluminum?

I typed everything thinking Wearymicrobe asked the question.

To the OP, Wearymicrobe:
What is the part number on the faces?
I see 021XXXX
The number after 02 is the model name. Usually.
As far as Mg vs Al - I am fairly certain it is MG.
To test, pull the wheel off, put a drop of vinegar on bare metal(backpad or lug nut area). Aluminum will not react in any visible way. Magnesium will.

[KyleAnderson]

Looks like BBS E16. Magnesium faces.

Aren't E16 faces much smaller?

With the "custom" information from BBS, and the fact the only 2 sets known were on SEMA cars, they're probably truly custom. How confident are you they're magnesium and not aluminum?

[zoo]

Can anyone identify this 12 spoke three piece BBs that I have on my Viper ACR. They are 18 x 11 front and 19 x 15 rear. They are mag centers. Nobody has seen a 12 spoke BBs and I cannot find anything on the BBs website. They show as "custom" when we look them up by the serial number. I know of one other pair that was made for a matching ACR convertible and both cars were shown at SEMA in 2010.

Looks like BBS E16. Magnesium faces.

[Wearymicrobe]

Can anyone identify this 12 spoke three piece BBs that I have on my Viper ACR. They are 18 x 11 front and 19 x 15 rear. They are mag centers. Nobody has seen a 12 spoke BBs and I cannot find anything on the BBs website. They show as "custom" when we look them up by the serial number. I know of one other pair that was made for a matching ACR convertible and both cars were shown at SEMA in 2010.

[GSXXX]

Need help Identifying wheels. Looks similar to vip modular vx110 but different. This is the only photo I have.

[hinrichs]

looks like Niche to me

https://www.ecstuning.com/b-niche-wheels-parts/18x8-misano-square-set-of-four/m11618802140kt/

[Svenska94Aero]

tumblr_ovsmvi3KS01qfqvowo1_540.jpg

18x9ish, 5x120. Trying to help a friend figure out what they are, came on his e36 M3. Any input?

[zoo]

Anyone have an idea what these pups are? I thought they were Futuras at first but they have more of a Meister SR1 spoke shape. Less of a star and more of a five spoke ¯\_(ツ)_/¯

Hamann PG1
Car and wheel info:

http://www.stancenation.com/2010/09/26/sittin-pretty/

[RomaRIO]

Anyone have an idea what these pups are? I thought they were Futuras at first but they have more of a Meister SR1 spoke shape. Less of a star and more of a five spoke ¯\_(ツ)_/¯

Look like Keskin kt 1

[hinrichs]

Anyone have an idea what these pups are? I thought they were Futuras at first but they have more of a Meister SR1 spoke shape. Less of a star and more of a five spoke ¯\_(ツ)_/¯

Look like Haman PG1 to me

[famsedan]

Anyone have an idea what these pups are? I thought they were Futuras at first but they have more of a Meister SR1 spoke shape. Less of a star and more of a five spoke ¯\_(ツ)_/¯

[rusheR]

Bought the wheels off of Ferrari 308. Seller claimed they are Revolution wheels, but googling that turned up nothing. There's no markings on the wheel whatsoever. Wheels are 3 piece, 5x108 bolt pattern and look pretty old, maybe early 70s. Would appreciate any info. Thanks

[virus-zn]

hi guys
need help identifying the model of these work wheels.
the bolts and rear of the faces are stamped with work.
specs are 16x7



18447382_10158949851070571_8905700617479875294_n.jpg

[Datsun720]

Does anyone know what these are? Made in Japan stamped on back. Two piece alloy, -20 offset 6 stud 15x7.
Thanks in advance.
FB_IMG_1495198132660.jpg
FB_IMG_1494906618271.jpg

[beatidogu]

Hi everyone. I'm struggling to identify the wheels on my S15, they look a bit like either Enkei RS7 or Racing RS but slightly different. Does anyone know what they might be? The car is on the boat from Japan atm hence the low quality pics.