++**"Help me identify this wheel!" Thread.**++

[Kersk]

Bought these off V.R wheels a few months ago. Look to be a three piece, I've spent a lotta time searching online, forums trying to identify. Look like face 2's but fatter spokes. Real similar to the stern Nadia's? But with the ridges shaved down? I do have




Sent from my iPad using Tapatalk

[zoo]

These are certainly Japanese. Look similar to BBS/Lorinser RT.
16x8, 30 bolt, 3 piece. The center plate is held on by an aluminum bolt, similar to BBS.
Chrome plating is aftermarket, almost certain of it. The barrels are anodized. Center bore is 12.5
No distinguishing markings other than CK-610

[OrangeBlue]

E28 spokes are longer than E26. Clearly not right.

They look like E26. Minor differences are common with BBS race wheels.

Mostly that's the case, hopefully the seller can figure it out till tomorrow...
But if i'm not mistaken, E26 are 15/16/17/18" with a small center and
E28 are 18" and up with a large center...

Which would make sense with the spoke beeing longer...

I'll see...

[KyleAnderson]

I thought that myself but the area around the bolt holes is a bit different...
I think they may be E28s...

E28 spokes are longer than E26. Clearly not right.

They look like E26. Minor differences are common with BBS race wheels.

[OrangeBlue]

Look like BBS E26. Should be a magnesium center.

I tought that myself but the area around the bolt holts is a bit different...
I think they may be E28s...

[OrangeBlue]

Seller say they are BBS
16x9 ET38 5x120

I found out what they are...

Dynatech Traxx

[Oh Damn, it's Sam]

Look like BBS E26. Should be a magnesium center.

[OrangeBlue]

It's a BBS Motorsport rim, but which..?

[staystetti]

I'm guessing that's what they are too. Thanks.

[Chris@fifteen52]

Dude says these are 'definitely made in Japan' and 'the rivets come out'

19x8:5/9.5. Obviously similar to Mito's but if anyone has insight that'd be cool
http://imgur.com/24oUbYr

Looks like Miro STP-3s that are no longer made. They are made in Taiwan I believe and they are only 1 piece cast. The bolts can be real or plastic fake bolts that snap in. They were available in 19x8.5 and 9.5

[staystetti]

Dude says these are 'definitely made in Japan' and 'the rivets come out'

19x8:5/9.5. Obviously similar to Mito's but if anyone has insight that'd be cool

http://imgur.com/24oUbYr

[Oh Damn, it's Sam]

^ Farmas look like they're correct, specifically Farmas D-Revolt. Weds often have welded faces, so you might need a lathe to get them apart.

[staystetti]

weds, 17x8, 5x114.3


Farmas, maybe?

guessing non-modular

[Oh Damn, it's Sam]

^ Carroll Shelby CSS.

[staystetti]

13", off an old corolla apparently.